Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
architecture final
| Question | Answer |
|---|---|
| The _____ is a cone-shaped structure covered with animal hides | c - tipi |
| The basic roof style of the ranch style is a _____ roof. | b - gabled |
| What type of houses were portable, mass-produced, not assembled, and available through catalogs? | c - mail order |
| The reason that a ranch design is generally more expensive to build than a two-story home of same square footage is that____. | a - it requires more roof area and more foundation length |
| Which of the following are advantages of the two-story design? | heating is relatively simple and economical because heat naturally rises from the fist to the second floor |
| An ______ drawing contains enough views of an object or structure to represent its true size and shape from all sides. | c - multiview |
| The top view of a structure is called an _____view | b - plan |
| A standard drawing sheet size that measure 9" x 12" is designated by the letter ______. | a -A |
| The _____ is used to draw circles and arcs. | c - compass |
| A standard drawing sheet size that measures 24" x 36" is designated by the letter ______. | d - D |
| The size of a standard C-size drawing sheet is ______. | b - 18 x 24 |
| An ____ line should be drawn lightly so it does not reproduce on a print. | a - construction |
| Reason for using CADD include _____ | d - all of the above |
| In which area does CADD provide true time savings? | b - revising drawings |
| Monitors, printers, and plotters are called_______ devices. | a - output |
| Standard symbols as well as related symbols used on drawings are stored in the _______. | a - symbol library |
| Which hardware is needed for a CADD system? | d - all of the above |
| The COPY command functions is much the same way as the ______ command, except that it places a capt of the selected object at the specified location. | a - MOVE |
| Commands that provide for the modifications of a drawing include _____. | a - erase, Move, Copy |
| Which one of the following commands may be used to modify drawings? | a - mirror |
| Which plan locates switches, electrical outlets, ceiling fixtures, and television and cable jacks? | d - electrical |
| Which plan shows such features as the hot and cold water pipes, waste lines, vents, and clean outs? | b - plumbing plan |
| An ________ plan illustrates all exterior and interior walls, doors, windows, patios, walks, desks, fireplaces, mechanical equipment, built-in cabinets, appliances, and bathroom fixtures. | c - floor |
| The floor plan is normally started ________ | a - first |
| The ___ door width should be used for doors. | a - acule |
| The scale commonly used for residential floor plans is ___. | d - 1/4" - 1' |
| Kitchen base cabinets are drawn _____ inches deep while wall cabinets are ______ inches deep. | a - 24:12 |
| The foundation plan is drawn from information present on the ______. | d - all of the above |
| Contour lines help describe the ___ of a site by depicting shape and elevation of the land. | d - topography |
| A point of beginning is shown on a drawing if a ____ is not readily available. | a - benchmark |
| The _____ roof is easy to build, sheds water well, provides for ventilation, and is applicable to a variety of house shapes and designs. | b - gable |
| A ____ roof is similar to a flat roof, but has more pitch | a - shed |
| A gambrel roof is sometimes called a ______ roof. | d - barn |
| Doors that are smooth on both sides and usually made of wood are called _____ doors. | c -flush |
| Pocket doors are a variation of the _____door | a-sliding |
| _ ____ doors are hinged is such a way that they may swing through an arc of 180 degrees. | c-double action |
| A ________ window may be opened or closed by using a crank or push bar on the frame of a handle on the sash. | c-easement |
| Double-hung windows have two _____. | b-sashes |
| Flush doors are usually made of _________. | c-wood |
| Features on an elevation that are below the grade line are shown as ________. | b-hidden lines |
| Roof angle is shown on the elevation using the _______. | c-either a or b |
| The usual scale of an exterior elevation is ______. | b-1/8" = 1' |
| The type of stairs with one landing at some point along the flight of steps is _________. | c-L stairs |
| Most spiral stairs are made from ________. | a- steel |
| Stars should have a slope of between ________ | c- 30-35 degrees |
| The main supporting members of the stairs are the _______. | b - stringers |
| Plain stringers are generally cut from ______- straight-grain fir. | d- 2 x 12 |
| TRUE OR FALSE: Architectural drafters ordinary draw an elevation of all side of a structure. | True |
| TRUE OR FALSE : CADD allows the designer to modify a design without having to redraw the entire plan. | True |
| TRUE OR FALSE: The scale of most residential floor plans is 1/4" =1'0" | True |
Created by:
salleejamie
Popular Miscellaneous sets