click below
click below
Normal Size Small Size show me how
Miter Saw Safety
Question | Answer |
---|---|
1 | The path of the saw blade has a safety zone that is __ inches wide on either side of the blade. Keep your hands OUT of this area. |
FENCE | Hold all materials down flat on the table and back against the _______while cutting. |
3 | Any materials less than__ inches long cannot be safely cut on the miter saw because that would put your hands within the safety zone. |
STOP | Do not reach for any pieces of wood in the safety zone until the blade has come to a complete_______. |
DOWN | Make all cuts as the saw is pulled ________through the stock and never as it moves back up through the stock. |
GUARD | Never use the saw without a proper safety ________in place. |
JAM | In harder woods and in thicker woods, the saw tends to _____into the stock and stop itself faster than in soft or thinner materials. |
CROSS | The miter saw is set for making only _______(across the grain cuts) or MITER (diagonal to the grain) miter cuts and is not to be used for rip cuts. |
1 | Because of the difficulty of holding multiple pieces together, only __ piece of material may be cut at a time. |
RETURN | At the end of the cut, always ________the saw back in the up position. |
MITER | (diagonal to the grain) |