click below
click below
Normal Size Small Size show me how
Woods 1 Quiz
What angle must a jointer fence be set at? | 90 degrees |
What should you use to check if a fence is at the correct angle? (Jointer) | Tri-square |
What should you use to push the board through the jointer? | Push block |
What are the parts of the jointer? | In-feed, cutterheads, and out-feed |
Describe the in-feed, out-feed, and cutterheads | In-feed: Where the wood is pushed through Out-feed: where the wood comes out of Cutterheads: the middle, where the knives are located |
What are the minimum and maximum lengths a piece of wood must be in order to be used on the jointer? | Minimum: 10 inches Maximum: None |
What are the minimum and maximum width sizes a piece of wood must be in order to be used on the jointer? What must the width also be? | Minimum: 2 inches Maximum: 8 inches Must be taller than the fence |
What are the minimum and maximum thickness sizes a piece of wood must be in order to be used on the jointer? | Minimum: 1/2 inch Maximum: none |
End to end is what? | Length |
Across the grain is what? | Length |
Edge to edge is what? | Width |
Against the grain is what? | Width |
Surface to surface is what? | Thickness |
The cutterheads have how many knives? | 3 |
How should you feed wood in? | Length wise |
Kick back goes through what? | The in-feed table |
What are the minimum and maximum lengths a piece of wood must be in order to be used on a planer? | Minimum: 6 inches Maximum: none |
What are the minimum and maximum width sizes a piece of wood must be in order to be used on a planer? | Minimum: 1/4 inch Maximum: 20 inches |
What are the minimum and maximum thickness sizes a piece of wood must be in order to be used on a planer? | Minimum: 1/4 inch Maximum: 8 inches |
What extra step must be noted when using the planer? | 1 turn on the adjustment wheel is the maximum |