Busy. Please wait.

show password
Forgot Password?

Don't have an account?  Sign up 

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
remaining cards
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

API 570 Temp Data

API 570

CUI affects Carbon Steel (Temperature Range) 25 – 250 oF
B31.3 Recommended Minimum Preheat Temps become Required </= 32 oF
Standard temperature range for a PT exam. 40 – 125 oF
Minimum flash point of hydrocarbons used for leak testing 120 oF
Temp when UT readings should be compensated for temperature. >/= 150 oF
CUI affects Stainless Steel (Temperature Range) 150 – 400 oF
Minimum pre-heat temperature when performing pre-heat in lieu of a PWHT 300 oF
Minimum pre-heat temperature when performing a local PWHT in lieu of a full encirclement PWHT 300 oF
Starting temperature of Sulfidation on Carbon Steel (sulfur content > 0.5% by weight) Per API 570 450 oF
Operating temperature which causes temper-embrittlement of low chromes (temperature range) 700 – 1070 oF
Graphitization begins for Carbon Steel materials 800 oF
Creep begins in 1-1/4% Chrome materials 900 oF
Maximum temperature for UT transducers with special delay lines (Per API 574) 1100 oF
Carbon Steel PWHT temperature 1100 – 1200 oF
Created by: sicktick