Use equipment with the instructor’s ____________.

Use equipment only when the _________ is in the lab.

________all accidents or injuries.

Do not use__________________ equipment.

Never use equipment until you have been properly___________ in its use.

Loose clothing can cause_______.

Long hair must be ___________ or covered •with a cap.

No __________ should be worn in the lab.

Never wear gloves except when handling _______lumber.

Wear_____________ shoes or boots.

Approved protection earmuffs should be worn around________ equipment.

A__________must be worn when working where there is dust.

Finishing materials should only be used in well _________ areas.

Always_________spilled materials.

Used rags are to be kept in a covered ______container.

Locate the _______________ and learn how to use them.

Keep cabinet doors and drawers _______.

Never leave anything on the _________ that could be slipped on or tripped over.

_____vises when they are not in use.

Workbenches should be kept__________and organized.

Use a_______or a rag to clear away scraps and sawdust.

Tools should be used only for what they are ___________.

_____tools should be carried with the edge or point held down toward the floor

A tool should always be held by the_______.

When you are finished with a tool return it to its__________________.

Ask for_________when you need to handle large or heavy material.

Lift with your______ not with your back

Never handle __________equipment if your hands are wet or if you are standing on a wet floor.

Equipment with a ___________________ power cord should be reported to the instructor. It should not be used.

Don’t yank on the power cord to disconnect a tool. Pull the________.

Use all the recommended _______and other safety devices when you operate power equipment.

Always disconnect the power equipment before you make any major_____________.

Never adjust equipment while it is _______.

When you turn off a machine, stay with it until it is _____________stopped.

Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________.

Don’t__________anyone while they are operating the equipment

Using tools and equipment requires your complete __________at all times.

Never fool around or _____in the lab.

Help

Options

focusNode

Didn't know it?
click below

Knew it?
click below

Don't Know

Remaining cards (0)

Know

retry

shuffle

restart

0:00

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

general safety note

stuff

Term	Definition
protection	Always wear eye_____________.
permission	Use equipment with the instructor’s ____________.
instructor	Use equipment only when the _________ is in the lab.
report	________all accidents or injuries.
defective	Do not use__________________ equipment.
instructive	Never use equipment until you have been properly___________ in its use.
injuries	Loose clothing can cause_______.
tied back	Long hair must be ___________ or covered •with a cap.
jewlery	No __________ should be worn in the lab.
rough	Never wear gloves except when handling _______lumber.
closed toed	Wear_____________ shoes or boots.
noisy	Approved protection earmuffs should be worn around________ equipment.
dust mask	A__________must be worn when working where there is dust.
ventilated	Finishing materials should only be used in well _________ areas.
clean up	Always_________spilled materials.
metal	Used rags are to be kept in a covered ______container.
fire extinguishers	Locate the _______________ and learn how to use them.
closed	Keep cabinet doors and drawers _______.
floor	Never leave anything on the _________ that could be slipped on or tripped over.
close	_____vises when they are not in use.
clear	Workbenches should be kept__________and organized.
brush	Use a_______or a rag to clear away scraps and sawdust.
disigned for	Tools should be used only for what they are ___________.
sharp	_____tools should be carried with the edge or point held down toward the floor
handle	A tool should always be held by the_______.
proper location	When you are finished with a tool return it to its__________________.
help	Ask for_________when you need to handle large or heavy material.
legs	Lift with your______ not with your back
electrile	Never handle __________equipment if your hands are wet or if you are standing on a wet floor.
damaged	Equipment with a ___________________ power cord should be reported to the instructor. It should not be used.
plug	Don’t yank on the power cord to disconnect a tool. Pull the________.
guards	Use all the recommended _______and other safety devices when you operate power equipment.
adjustments	Always disconnect the power equipment before you make any major_____________.
running	Never adjust equipment while it is _______.
compleatly	When you turn off a machine, stay with it until it is _____________stopped.
stopped	Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________.
distract	Don’t__________anyone while they are operating the equipment
attention	Using tools and equipment requires your complete __________at all times.
safe	Always work at a _____speed.
play	Never fool around or _____in the lab.

Created by: h0503371

Popular Engineering sets

1. Technology and technological process

Penetrant LVL 2

Mag Particle LVL1

Alternative Energy

Bridge Building Vocab

The Nature of Science

Simple Machines

Electronics Symbols

"Know" box contains:
Time elapsed:
Retries: