Image Acquisition Word Scramble
H T G H O R U
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| the purpose of the electroconductive layer of the CR PSP plate is to | facilitate transportation through the scanner/reader |
| the reduction in xray photon intensity as the photon passes through material is termed | attenuation |
| which of the following technical change would best serve to remedy the effect of very dissimilar tissue densities | high KV exposure factors |
| during CR imaging, the latent image present on the PSP is changed to a computerized image by the | ADC |
| the luminescent light emitted by the PSP is transformed into the image seen on the CRT by the | ADC (analog to digital converter) |
| The term windowing describes the practice of | changing the image brightness and/or contrast scale |
| the direction of electron travel in the xray tube is | cathode to anode |
| in digital imaging, TFT DEL size is related to | spatial resolution |
| the intensity of ionizing radiation decreases as | distance from the source of radiation increases |
| what is the purpose of the thin layer of lead that is often location in the rear portion of the IP | to prevent scatter radiation |
| In a duration of 0.05 second was selected for an exposure what mA would be necessary to produce 30 mAs? | 600 mA |
| what does not affect the exposure rate of the primary beam? | field size |
| the absorption of useful radiation by a grid is called | grid cutoff |
| At what portion of the xray beam is the effective focal spot the largest? | at the cathode end |
| diagnostic xrays are generally associated with | high frequency and short wavelength |
| the relationship between the height of a grid's lead strips and the distance between them is referred to as grid | ratio |
| SId affects recorded detail in which of the following ways? | directly related |
| The component of a CR image plate that records the radiologic image is | photostimulable phospor |
| because of the anode heel effect the intensity of the xray beam is greatest along the | cathode end of the beam |
| Misalignment of the tube-part-IR relationship results in | shape distortion |
| Grid interspace material is made up of what? | Aluminum and plastic fiber |
| Unopened boxes of radiographic film should be stored away from radiation and | in the vertical position |
| for the same FOV the spatial resolution will be improved using | a larger matrix |
| the xray image seen on the computer display monitor is a | digital image |
| a radiograph made with a parallel grid demonstrates decreased density on its lateral edges. this is most likely due to | decreased SID |
| foreshortening can be caused by | the radiographic object being placed at an angle to the IR |
| the accessory used to measure the thickness of body parts in order to determine optimal selection of exposure factors is the | caliper |
| a particular mAs value, regardless of the combination of the mA and time, will reproduce the same radiographic density, this is a statement of the | reciprocity law |
| a patient with Congestive heart failure has to have what done to the technique for a PA chest Xray? | Increase |
| How are mAs and patient dose related? | directly |
Created by:
jfwoodard
Popular Radiology sets