Busy. Please wait.
Log in with Clever
or

show password
Forgot Password?

Don't have an account?  Sign up 
Sign up using Clever
or

Username is available taken
show password

Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.

RadQA Test

Enter the letter for the matching Answer
incorrect
1.
Fluoroscopic AEC should be evaluated __________.
incorrect
2.
____ begins with the x-ray imaging systems used to produce the image and continues with the routine evaluation of image-processing facilities.
incorrect
3.
The terms ______________ and _____________ are used to encompass all activities related to quality management, including utilization and risk management, infection control, surgical case review, medication usage evaluation, and heatlh record.
incorrect
4.
With a PBL collimator, the x-ray beam must not be larger than the image receptor except in the _________________.
incorrect
5.
Two areas os activity are designed to ensure the best possible diagnosis at an acceptable radiation dose and with minimum cost. These areas are ______________ and _____________.
incorrect
6.
Environmental radiation can contribute to _____________.
incorrect
7.
Photofluorospot images are recorded on film from the ____________ of an image-intesifier tube.
incorrect
8.
With incrementing from one tomographic section to the next, the section level should be accurate to within ________.
incorrect
9.
Digital image receptors have unique artifacts associated with ______________.
incorrect
10.
The variation in x-ray intensity should not exceed _____.
incorrect
11.
The spatial resolution of a radiographic imaging system is determined principally by the ____________ of the x-ray tube.
incorrect
12.
Measurements for exposure rates are made with a __________ that these levels are not exceeded.
incorrect
13.
Photofluorospot images uses less _________, require les _____________, and are produced with a lower ____________.
incorrect
14.
Each new Rad eqpt must be acceptance tested b4 it is applied clinically. The test must be done by someone other than the _________ cause it is des. to show that the eqpt is working within the manfac’s spec. and is producing and acceptable pt rad dose.
incorrect
15.
____________ should be evaluated annually or whenever an x-ray tube is replaced.
incorrect
16.
Intensity should be at least _________ and should not vary by more than _____ over the surface of the illuminator.
incorrect
17.
For interventional procedures, a skin dose of ________ is not uncommon but should be avoided if possible.
incorrect
18.
The measured kVp should be within ____ of the indicated kVp.
incorrect
19.
Quality assurance deals with ___________.
incorrect
20.
QA also involves image interpretation. Did the patient's ultimate disease or condition agree with the radiologist's diagnosis? This is called _______________.
A.
+/- 2mm
B.
Focal-spot size
C.
Outcome analysis
D.
10%
E.
100 rad
F.
Override mode
G.
annually
H.
Focal-Spot size
I.
People
J.
Pixel failure
K.
1500 cd/m^2; +/- 10%
L.
5%
M.
Quality assurance (QA) and quality control (QC)
N.
Manufacturer's representative
O.
QC
P.
Calibrated radiation dosimeter
Q.
Ghost artifacts
R.
quality assurance; quality assesment
S.
output phosphor
T.
film, personnel interaction, and patient dose
Type the Answer that corresponds to the displayed Question.
incorrect
21.
Constancy of ______ from one QC evaluation to the next should be achieved.
incorrect
22.
As with QA, QC requires a team effort, but QC is principally the responsibility of the _________________.
incorrect
23.
An ESE of approximately _____ may be assumed for a photofluorospot.
incorrect
24.
Regardless of the material thickness and the absolute exposure time, the optical density of the processed image should be __________.
incorrect
25.
Sequential radiation exposures should be reproducible to within ______.
incorrect
26.
_____________ activites include work performed by various hospital committees and the medical staff, as well as other professional staff from various hospital departments.
incorrect
27.
Each system functions in the manner of the phototimer of a radiographic imaging system, producing constant image brightness on the video or flat panel monitor, regardless of the ___________ or ___________ of the antaomy.
incorrect
28.
Exposure timer accuracy should be within ___ of the indicated time for exposure times greater than ___.
incorrect
29.
An ESE of approximately _______ may be assumed for a cassette spot film.
incorrect
30.
Federal law and most state statutes require that under noraml operation, the ESE shall not exceed ___________.

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how
Created by: o3iiheartmmg04