ARRT registry review
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| What can be measured with a pinhole camera, slit camera, or star-pattern-type resolution device? (232) | Focal-spot size
🗑
|
||||
| What is the term that refers to the abnormal distention of the pulmonary alveoli or tissue spaces with air? (246) | Emphysema
🗑
|
||||
| The larger the matrix size, the better the __________? (253) | Image resolution
🗑
|
||||
| What system moves film from solution to solution between rollers, changing the direction of the film around critical turns? (267) | Transport System
🗑
|
||||
| True or False. The shortest possible exposure time should be used to minimize motion unsharpness? (236) | True
🗑
|
||||
| What is the term that is used to define a grainy, spotted, or freckled appearance? (249) | Quantum noise or mottle
🗑
|
||||
| What are used in radiography to trap scattered radiation that would otherwise cause fog on the radiograph? (258) | Grids
🗑
|
||||
| What is the sum of film emulsion contrast and subject contrast? (262) | Radiographic contrast
🗑
|
||||
| What type of distortion is caused by misalignment of the x-ray tube, the part to be radiographed, and the IR film? (270) | Shape distortion
🗑
|
||||
| As grid ratio increases, more penetration and greater production of scattered radiation occur, producing what kind of contrast scale? (255) | Longer scale
🗑
|
||||
| What is defined as the heigh of the lead strips to the width of the interspace material? (237) | Grid ratio
🗑
|
||||
| What is the result if the developer replenishment is excessive and too much new solution is replacing the deteriorated developer? (241) | Chemical fog
🗑
|
||||
| Beam alignment must be accurate to within ___% of the SID. (245) | 2%
🗑
|
||||
| A 15% increase in kilovoltage means that the mAs must be what? (251) | Divided by 2
🗑
|
||||
| How is SID related to recorded detail and resolution? (256) | Directly
🗑
|
||||
| Name the law that the intensity or exposure rate of radiation is inversely proportional to the square of the distance from its source? (264) | Inverse-square law
🗑
|
||||
| Pneumoperitoneum is an abnormal accumulation of air in the peritoneal cavity and would require a what in exposure factors? (264) | Decrease
🗑
|
||||
| What is the percentage range of humidity that x-ray film should be stored in? (268) | 40-60%
🗑
|
||||
| What is the factor for a 8:1 grid ratio? (274) | 4
🗑
|
||||
| Reproducibility testing should specify that radiation output be consistent to within how much percentage? (271) | +/- 5%
🗑
|
||||
| One way to alter image contrast and/ or brightness is through? (235) | Windowing
🗑
|
||||
| A 15% decrease in kilovoltage means that the mAs must be what? (245) | Multiplied by 2
🗑
|
||||
| What is the definition for a graphic representation of pixel value distribution? (247) | Histogram
🗑
|
||||
| True or False. With three-phase equipment, the voltage never drops to zero. (246) | True
🗑
|
||||
| What function to limit the size of the irradiated field? (256) | Beam restrictors
🗑
|
||||
| The general rule is that structures measuring more than ____cm should be radiographed with a ged. (262) | 10
🗑
|
||||
| What kind of testing provides beam quality information that is different from that obtained from kV testing? (251) | HVL
🗑
|
||||
| What are the four parts of x-ray film processing? (249) | Development, fixing, wash, and dry
🗑
|
||||
| Central ray angulation against the direction of the lead strips will result in? (240) | Grid cutoff
🗑
|
||||
| The single most important factor regulating radiographic contrast is? (256) | Kilovoltage
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
hmchew2
Popular Radiology sets