Busy. Please wait.
Log in with Clever
or

show password
Forgot Password?

Don't have an account?  Sign up 
Sign up using Clever
or

Username is available taken
show password

Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.

Equipment Operation and Quality Control

Quiz yourself by thinking what should be in each of the black spaces below before clicking on it to display the answer.
        Help!  

Question
Answer
The type of x-ray tube designed to turn on and off rapidly, providing multiple short, precise exposures, is (pg. 279 #2)   show
🗑
show MRI, CT, CR  
🗑
What circuit deices operate on the principle of self-induction? (pg. 279 #5)   show
🗑
If a high-voltage transformer has 100 primary turns and 50,000 secondary turns and is supplied by 220 V and 100 A, what are the secondary voltage and current? (pg. 280 #7)   show
🗑
show The image is magnified  
🗑
The minimum response time of an automatic exposure control "AEC" (pg. 280 # 10)   show
🗑
What are some characteristics of the x-ray tube? (pg. 281 #13)   show
🗑
show Radiopaque objects  
🗑
show Cracking of the anode, rotor-bearing damage  
🗑
As window level increases (pg. 282 #22)   show
🗑
Which of the following is/are components of the secondary, or high voltage, side of the x-ray circuit (pg. 282 #23)   show
🗑
show Protect the patient from overexposure, protect the x-ray tube from excessive heat  
🗑
A slit camera is used to measure (pg. 282 #28)   show
🗑
show A very thin coating of cesium iodide on the input phosphor and a smaller diameter input screen  
🗑
show The variety of field sizes available and more efficient beam restriction  
🗑
show 13%  
🗑
show Bremsstrahlung radiation  
🗑
show Charge-coupled device  
🗑
show Solid arc, with the angle (in degrees) representative of the exposure time  
🗑
The procedure whose basic operation involves reciprocal motion of the x-ray tube and film is (pg. 284 #43)   show
🗑
When the radiographer selects kilovoltage on the control panel, what device is adjusted? (pg. 284 #45)   show
🗑
show Three-phase transformers  
🗑
show Beam splitter  
🗑
show X-ray tube glass envelope, x-ray tube port window  
🗑
show The timer, kilovoltage mete, and autotransformer  
🗑
show They can prohibit the use of very short exposure times and they increase patient radiation dose  
🗑
The functions of a picture archiving and communication system (PACS) include (pg. 286 #56)   show
🗑
How many half-value layers will it take to reduce and x-ray beam whose intensity is 78 R/min to an intensity of less than 10 R/min (pg. 286 #57)   show
🗑
show +/-4 kV  
🗑
show Grid cutoff and insufficient radiographic density  
🗑
The x-ray tube in a CT imaging system is most likely to be associated with (pg. 286 #60)   show
🗑
show Lengthy anode rotation and exposures to a cold anode  
🗑
show Flux gain and minification gain  
🗑
What information is necessary to determine the maximum safe kilovoltage using the appropriate x-ray tube rating chart? (pg. 287 #64)   show
🗑
show Timer accuracy and rectifier failure  
🗑
show A solid state diode  
🗑
show 6 in.  
🗑
show Acts as additional filtration  
🗑
show Annually  
🗑
show Using high milliamperage and using fast film screen combinations  
🗑
Which of the following isare associated with magnification fluoroscopy? (pg. 290 #87)   show
🗑
show Ability to store a large quantity of energy and ability to store energy for extended periods of time  
🗑
show 12 inch mode  
🗑
The AEC device can operate on which of the following principles (pg. 290 #92)   show
🗑
show Increase heat of the filament  
🗑
If 92 kV and 15 mAs were used for a particular abdominal exposure with single phase equipment, what milliampere-seconds value would be required to produce a similar radiograph with three-phase 12 pulse equipment (pg. 290 #94(   show
🗑
show Magnification radiography  
🗑
Which of the following devices is used to control voltage by varying resistances? (pg. 292 #100)   show
🗑
show 10 degree target angle, 1.2 mm actual focal spot  
🗑
Which of the following would be appropriate IP front materials? (pg. 293 #109)   show
🗑
show Annually  
🗑
Accurate operation of the AEC device depends on (pg. 294 #113)   show
🗑
The image intensifier's input phosphor generally is composed of (pg. 294 #114)   show
🗑


   

Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
 
To hide a column, click on the column name.
 
To hide the entire table, click on the "Hide All" button.
 
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
 
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.

 
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how
Created by: rdwilliams1
Popular Radiology sets