click below
click below
Normal Size Small Size show me how
matthew birgy-safety
general safty notes
| Question | Answer |
|---|---|
| always wear eye | protection |
| Use equipment with the instructor’s | Permission |
| Use equipment only when the _________ is in the lab. | Instructor |
| .________all accidents or injuries. | Report |
| . Do not use__________________ equipment. | Defective or Faulty |
| Never use equipment until you have been properly___________ in its use. | Instructed |
| Loose clothing can cause_______. | Injuries |
| . Long hair must be ___________ or covered with a cap. | Tied back |
| No __________ should be worn in the lab. | Jewelry |
| Never wear gloves except when handling _______lumber. | Rough |
| Wear_____________ shoes or boots. | Closed toe |
| Approved protection earmuffs should be worn around________ equipment. | |
| A__________must be worn when working where there is dust | |
| Finishing materials should only be used in well _________ areas. | Ventilated |
| Always_________spilled materials | |
| Used rags are to be kept in a covered ______container. | Metal |
| Locate the _______________ and learn how to use them. | |
| Keep cabinet doors and drawers _______. | Closed |
| Never leave anything on the _________ that could be slipped on or tripped over. | |
| ._____vises when they are not in use. | Close |
| Workbenches should be kept__________and organized. | Clear |
| . Use a_______or a rag to clear away scraps and sawdust. | Brush |
| Tools should be used only for what they are ___________. | Designed for. |
| _____tools should be carried with the edge or point held down toward the floor. | Sharp |
| A tool should always be held by the_______. | Handle |
| When you are finished with a tool return it to its__________________. | Proper location |
| Ask for_________when you need to handle large or heavy material | Help |
| Lift with your______ not with your back | Legs |
| Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | Electrical |
| Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | Damaged or Frayed |
| 31.Don’t yank on the power cord to disconnect a tool. Pull the________. | Plug |
| Use all the recommended _______and other safety devices when you operate power equipment. | Guards |
| Always disconnect the power equipment before you make any major_____________. | Adjustments |
| Never adjust equipment while it is _______. | Running |
| When you turn off a machine, stay with it until it is _____________stopped. | Completely |
| Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | Stopped |
| Don’t__________anyone while they are operating the equipment. | Distract |
| Using tools and equipment requires your complete __________at all times. | Attention |
| Always work at a _____speed. | Safe |
| Never fool around or _____in the lab. | Play |