click below
click below
Normal Size Small Size show me how
Safety study stack
| Question | Answer |
|---|---|
| . Always wear eye_____________. | Protection |
| . Use equipment with the instructor’s ____________. | Permission |
| Use equipment only when the _________ is in the lab. | Instructor |
| .________all accidents or injuries | Report |
| Never use equipment until you have been properly___________ in its use. | Instructed |
| Do not use__________________ equipment | Damaged or faulty |
| Loose clothing can cause_______. | Injuries |
| . Long hair must be ___________ or covered with a cap. | Tied back |
| . No __________ should be worn in the lab. | jewelry |
| Never wear gloves except when handling _______lumber. | rough |
| . Wear_____________ shoes or boots | closed toe |
| Approved protection earmuffs should be worn around________ equipment. | noisy |
| . A__________must be worn when working where there is dust. | dust mask |
| 14.Finishing materials should only be used in well _________ areas. | ventilated |
| . Always_________spilled materials. | clean up |
| Used rags are to be kept in a covered ______container. | metal |
| Locate the _______________ and learn how to use them. | fire extingusher |
| . Keep cabinet doors and drawers _______. | closed |
| Never leave anything on the _________ that could be slipped on or tripped over. | floor |
| ._____vises when they are not in use. | close |
| Workbenches should be kept__________and organized. | clear |
| Use a_______or a rag to clear away scraps and sawdust. | brush |
| Tools should be used only for what they are ___________. | designed for |
| . _____tools should be carried with the edge or point held down toward the floor | sharp |
| A tool should always be held by the_______. | handle |
| When you are finished with a tool return it to its__________________. | proper location |
| . Ask for_________when you need to handle large or heavy material | help |
| . Lift with your______ not with your back. | Legs |
| . Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | electrical |
| Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | damaged or frayed |
| 31.Don’t yank on the power cord to disconnect a tool. Pull the________. | plug |
| Use all the recommended _______and other safety devices when you operate power equipment. | guards |
| Always disconnect the power equipment before you make any major_____________. | adjustments |
| Never adjust equipment while it is ______ | running |
| When you turn off a machine, stay with it until it is _____________stopped. | completely |
| . Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | stopped |
| Don’t__________anyone while they are operating the equipment. | distract |
| . Using tools and equipment requires your complete __________at all times. | attention |
| Always work at a _____speed. | safe |
| Never fool around or _____in the lab. | play |