Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Unit 4 safe
period 1
| Question | Answer |
|---|---|
| Always wear eye_____________. | Protection |
| Use equipment with the instructor’s ____________. | Permission |
| Use equipment only when the _________ is in the lab. | Instructor |
| .________all accidents or injuries. | Report |
| Do not use__________________ equipment. | Defective or Faulty |
| Never use equipment until you have been properly___________ in its use. | Instructed |
| Loose clothing can cause_______. | Injuries |
| Long hair must be ___________ or covered with a cap. | Tied back |
| No __________ should be worn in the lab | Jewelry |
| Never wear gloves except when handling _______lumber. | Rough |
| Wear_____________ shoes or boots | Closed toe |
| Approved protection earmuffs should be worn around________ equipment. | Noisy |
| A__________must be worn when working where there is dust. | Dust Mask |
| Finishing materials should only be used in well _________ areas | Ventilated |
| Always_________spilled materials. | Clean up |
| Used rags are to be kept in a covered ______container. | Metal |
| Locate the _______________ and learn how to use them. | Fire Extinguishers |
| Keep cabinet doors and drawers _______. | Closed |
| Never leave anything on the _________ that could be slipped on or tripped over. | Floor |
| ._____vises when they are not in use. | Close |
| Workbenches should be kept__________and organized. | Clear |
| Use a_______or a rag to clear away scraps and sawdust. | Brush |
| Tools should be used only for what they are ___________. | Designed for |
| _____tools should be carried with the edge or point held down toward the floor. | Sharp |
| A tool should always be held by the_______. | Handle |
| When you are finished with a tool return it to its__________________. | Proper location |
| Ask for_________when you need to handle large or heavy material. | Help |
| Lift with your______ not with your back. | Legs |
| Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | Electrical |
| Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | Damaged or Frayed |
| 31.Don’t yank on the power cord to disconnect a tool. Pull the________. | Plug |
| Use all the recommended _______and other safety devices when you operate power equipment. | Guards |
| Always disconnect the power equipment before you make any major_____________. | Adjustments |
| Never adjust equipment while it is _______. | Running |
| When you turn off a machine, stay with it until it is _____________stopped. | Completely |
| Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | Stopped |
| . Don’t__________anyone while they are operating the equipment. | Distract |
| Using tools and equipment requires your complete __________at all times | Attention |
| Always work at a _____speed. | Safe |
| Never fool around or _____in the lab. | Play |
Created by:
L0302653
Popular Physics sets