Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Sessions Recording

full sail university

QuestionAnswer
how many channels on the SSL SL 9000J 72 channels
how many channels on the AMEK 9098i 80 channels
how many inputs on the SSL SL 9000J 144
how many inputs on the AMEK 9098i 160
how many channels on the AWS 900+ 24
how many channels on the SSL Duality SE 72 channels
how many inputs on the SSL Duality SE 72 inputs
how many inputs on the AWS 900+ 48
how many busses on the SSL SL 9000J 48 busses
how many busses on the Amek 9098i 48 busses
how many busses on the AWS 900+ 8 busses
how many busses on the SSL Duality SE 24
how many aux sends on AWS 900+ 4 FX Sends (2 at a time)
how many aux sends on SSL SL 9000J 6 aux sends
how many aux sends on Amek 9098i 16 auxes
how many aux sends on SSL Duality SE 4 FX sends
how many busses can you assigned to the SSL SL 9000j 1-24, 25-48 or both by pressing the 1/24 or 25/48 buttons.
what tell the Routing Matrix where to get its signal from in SSL SL 9000J. The LF (Large Fader) and SF (Small Fader) buttons (You can only use one at a time)
What tells the Master Buss on that IO to get it's signal from the Channel Fader, bypassing the Routing Matrix in SSL SL 9000J The FADER button
On the SSL 9000j, the output of the Master Buss feeds the Multitrack Recorder
the input section to the Channel Path defaults to a Mic Input in ________ MODE and a Line Input in ________ MODE. Record & Mix
On the SSL 9000j,The ______ button toggles between the MIC & LINE inputs. Flip Button
On the SSL 9000j, The red knob marked MIC is the Mic Pre Amp gain.
On the SSL 9000j, The red knob marked LINE is the Line trim / gain.
On the SSL 9000j, inverts the polarity of the audio signal, swapping the positive and negative legs of the signal. The ⌀ (polarity) button
On the SSL 9000j, feeds the signal from the Master Buss to the Channel Path bypassing the MIC and LINE inputs. The SUB GP (Sub Group) button
On the SSL 9000j, changes the input Impedance of the MIC input. The HIGH Z (High Impedance) button
On the SSL 9000j, PAD that reduces the input signal by 20dB. The -20dB button
On the SSL 9000j, Pressing the LINK button, links the Compressor of the dynamic section to the Compressor of the dynamic section on the next IO to the right.
On the SSL 9000j, what button switches the dynamic section into the channel path pre equalize the CH IN (Channel In) button
On the SSL 9000j, switches the dynamics into the channel path post equalizer the CH OUT (Channel Out)
On the SSL 9000j, The insert send and return by default are Post (after) the EQ section.
On the SSL 9000j, Pressing the PRE button moves the insert send and return Pre (before) the EQ.
On the SSL 9000j, Pressing the IN button makes the Insert Return active.
On the SSL 9000j, what button activates the EQ. EQ IN button
On the SSL 9000j, what button places the EQ and filters in the Monitor Path The MON
On the SSL 9000j, changes the equalizer's curve characteristics from G to E. The E button
On the SSL 9000j, the Stereo Cue Section by default is fed from the Large Fader
On the SSL 9000j, Pressing what buttons feeds the signal from the small fader to the stereo cue the SF (Small Fader) button
On the SSL 9000j, sends signal from the Multi-Track Recorder to the Monitor Path The TAPE button sends
On the SSL 9000j, In Record Mode, the Monitor Fader feeds the Mix Buss
On the SSL 9000j, In Mix Mode, the Channel Fader feeds the Mix Buss
on the AMEK 9098i, what tells the Routing Matrix to receive its signal from the Monitor Fader instead of the Channel Fader. The 48TK button
on the AMEK 9098i, By default, the aux sends get their signal from the channel fader.
on the AMEK 9098i, Pressing the MON (Monitor) button allows the aux to gets it's signal from the Monitor Fader
on the AMEK 9098i, Pressing the Pre button allows the aux to get it's signal before the fader. (in other words, the fader will not affect the volume of the aux.)
on the AMEK 9098i, the High and Low Pass Filters can only be used on the Channel Path.
on the AMEK 9098i, The SAFE button activates Solo Safe feature
on the AMEK 9098i, When Solo Safe is engaged this Monitor Fader will not ______ when another Monitor Fader or Channel Fader is SOLOED MUTE
on the AMEK 9098i, The SAFE button activates Solo Safe feature
on the AMEK 9098i, By default, the Monitor Path is fed by the TAPE (Multi-Track Recorder).
on the AMEK 9098i, tells the Monitor Path to receive its signal from the Master Buss of that IO. The BUSS button
on the AMEK 9098i, inputs for the Channel Path and Monitor Path are reversed. the Input REV button, the mic and line inputs for the Channel Path will now feed the Monitor path and the TAPE and BUSS inputs for the Monitor Path will now feed the Channel Path.
on the AMEK 9098i, the small Monitor Fader now controls signal on the Channel path and the large Channel Fader now controls signal on the Monitor Path. the Fade REV button
on the Amek 9098i, Whether you are in RECORD MODE or MIX MODE the Monitor Section will alway be ___________ / ____________. This section is typically fed by the__________________ / ______________. Monitor Path / Monitor Fader & Multi-Track Recorder / Tape machine
on the AMEK 9098i, sends the signal on the Monitor Path to the MIX BUSS The LCRS button
on the AMEK 9098i, The EQ is split into 4 sections. HF (High Shelving Filter), HMF (High Mid Filter), LMF (Low Mid Filter), LF (Low Shelving Filter)
on the AMEK 9098i, The IN button activates the Insert return
on the AMEK 9098i, CH INS puts EQ on the Channel path / (Channel Insert Return)
on the AMEK 9098i, MON INS puts the EQ on the Monitor path / (Monitor Insert Return)
on the AMEK 9098i, moves the insert point from after the EQ section (POST EQ) to before the EQ section (PRE EQ) . The PRE button
Name some of Chuck Ainlay’s Credits George Strait, Dixie Chicks, Vince Gill, Patty Loveless, Wynonna, and even such rock icons as Dire Straits and Mark Knopfler,
name some of Steve Albini’s Credits Nirvana’s In Utero, PJ Harvey, The Pixies, The Breeders, Silkworm, The Jesus Lizard, Nina Nastasia, and Jimmy Page/Robert Plant Walking into Clarksdale.
name some of Michael Beihorn’s credits. Aerosmith, Soundgarden, Soul Asylum, Red Hot Chili Peppers, Ozzy Osbourne, Fuel, Korn, and Marilyn Manson,
Created by: lwicard
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards