Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Scrapers

TermDefinition
Nomenclature Model 621 - G Pusher Assisted single axle tractor
Weight Empty - 74,300 Rated load - 52,800
Loaded Struck 127,100 lbs (15.7 CY)
Loaded Heaped 132,245 lbs (22 CY)
Height 11ft 4 in
tractor ground clearance 21.8 in
scraper ground clearance 20.6 in
length 43 ft 3 in
Rim pull force available between tire and ground to move tractor forward
1st and 2nd gear 330 hp @ 1800 rpm
3-8 gears 365 hp @ 1800 rpm
Volt system (slave recep.) 24V
Transmission 8 forward, 1 reverse
Cutting edges change - 3/4" from moldboard max cut depth - 13.1 in
Bowl cut width 119 in
Side Slope w/ load - 20% (11 deg. 1st gear/reverse) wo/ load - 35% (20 deg.)
Minimum effective hauling distance 300 Ft
Maximum effective hauling distance 3000 ft
Struck Capacity 15.7 cu yds
Heaped capacity 22 cu yds
Techniques downhill loading obtain larger loads in no time
Chain loading long continuous cut with 2 or more scrapers
shuttle loading short cuts in both direction, pushes one scraper and pushes a second in opposite direction
back track loading short cuts
Travel configuration (2 knuckle ) 4-6 in off ground ejector to rear apron on float
Cut position (3 knuckle) 1 in off ground apron open 12 in ejector to rear
Level position bowl level on ground apron open ejector forward
Park line Neutral, park brake bowl on ground Ejector forward apron float
Steering width - Right turn 90 deg, 38 ft radius
Steering Width - Left turn 85 deg, 40 ft radius
Dome light in STOP LIGHT/SER DRIVE door open
Power Receptable 12V
Cushion Hitch control active except when loading or spreading material
Overspeed Condition top gear control will allow transmission to upshift one speed
Max speed 32 MPH
Loping rhythmic up-and-down motion of the machine
Front tire pressure 65 psi
Rear tire pressure 55 psi
Fuel Capacity 160.1 gal
Coolant system 19.3 gal (50/50 mix of water and antifreeze)
Temperature 32 deg. or above 15 min warm up
Temperature below 32 deg 30 min warm up
Created by: kevinn.nm
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards