Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Belk's Masonry
Masonry Safety
| Question | Answer |
|---|---|
| What is one of the four leading causes of death in the construction industry? | Falling |
| Which type of sign has a white background with a green panel and white lettering? | Safety |
| Keeping your work area clean and free of scraps or spills is referred to as | Housekeeping |
| How should oily rags be properly disposed of? | Container used for this purpose |
| What does HAZCOM classify all paint, concrete, and wood dust? | Hazardous chemicals |
| Under HAZCOM if you spot a hazard on your job site, you must report it to your | Supervisor |
| All __________and __________ should be reported to the supervisor | Injuries, incidents |
| Metal ladders should not be used near_________equipment | electrical |
| If you lean a straight ladder against the top of a 16ft (4.9m) wall, the base of the ladder should be_____ from the base of the wall | 4 ft |
| The two basic types of scaffolds are _________and _________. | Self supporting and suspended |
| What is the most common cause of death for equipment operators? | Equipment rollover |
| To reduce the risk of workers being hurt or killed by falling materials, the maximum height to bast ratio of a stack of materials should be ________ ratio. | 4 to 1 |
| Interlocking stacked material is done by placing them at _______ angles, or "crossing them up" | right angles |
| Most cave-ins happen suddenly with little or no warning and occur in trenches 5 feet (5') to _____ deep. | 15 feet deep |
| In every trench over 4 feet (4')(1.2 m) deep there must be an exit every ________. | 25 feet |
| What is the minimum distance that a spoil pile must be located from the edge of excavation? | 2 feet (ft) |
| Which type of trench protection is designed to prevent trench wall cave-ins? | Shoring |
| The purpose of protective guards on power tools and machines are to keep workers from being caught in __________ or ________ parts. | rotating or moving |
| Circuit breakers and disconnect switches are examples of _________ isolating devices. | energy |
| What determines the minimum safe working distance from exposed electrical equipment or conductors? | regulations and company policies |
| Work that is performed near a hazard but not in direct contact with it is called _________ work. | proximity |
| Which of the following provides the best eye protection from all directions? | Safety goggles |
| Which type of respirator has its own clean air supply? | Underwater |
| A worker can be exposed to hazardous materials by inhalation, ingestion, and ________. | absorbtions |
| What causes hypothermia? | Prolong exposure to cold |
| Why must grease and oil be kept away from oxygen tanks? Grease and oil can cause oxygen to | explode |
| When is storage, oxygen, and fuel cylinders used in oxyfuel cutting must be separated by __________ft. | 20 feet |
| Which of these just be present in the same place at the same time for for a fire to occur? ___________, ___________, and _________. | Heat, oxygen, fuel |
| What characteristics are typical of a confined space? | It has a limited amount of ventilation |
Created by:
krierson