Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Safety for Electrici
Safety for Electrician
| Term | Definition |
|---|---|
| You only work when ? | supervised by more experienced and qualified electricians. |
| What is the focus four? | fall hazards, electrical hazards, caught in or between hazards, and struck by hazards. |
| about 90% of death come from? | The Focus Four |
| Electricity causes electrons to move in a conductor . The movement is called? | Electric current |
| Maintaining three point contact on a ladder means that | you must either have both feet and one hand on the ladder or both hands and one foot as you climb |
| Which of the following is considered a confined space? | Hopper |
| Fluorescent light fixtures may contain? | PCBs |
| Which of the following is not one of the focus four on a construction site? | Chemical Shocks |
| Low voltage conductors? | are responsible for most electrocution deaths due to the frequency of contact |
| A shock of 5 mA can cause injury through? | involuntary movement |
| If a person's heart begins to fibrillate due to an electrical shock, the solution Is to _ | have a qualified person use a As it is erected, each part of a scaffolding shall be carefully |
| A machine guard is a type of? | Engineering tool |
| A work permit is a type of? | Administrative controls |
| The least effective method of preventing risk is through the use of? | PPE |
| The type of hard hat that can withstand a voltage of 20,000VAC for three minutes ? | Class E |
| Class 0 rubber gloves are used when working with voltages less than? | 1,000 VAC |
| An important use of a hot stick is to? | replaces Fuses |
| Which of these statements correctly describes a double-insulated power tool? | It can safely be used in place of a grounded tool. |
| Which of the following applies in a LOTO procedure? | LOTO devices are installed by every employee involved in the wor |
| The NEC® covers the? | minimum requirements for the installation of electrical systems |
| What is the proper distance from the feet of a straight ladder to the wall? | One-fourth the working height of the ladder |
| What are the minimum and maximum distances that a scaffold plank can extend beyond its end support? | 6:12 |
| What happens to the permits used to enter a confined space? | They are reviewed at the end of each shift and retained for three months. |
| The best way to protect yourself from solvent hazards is to? | read and follow all instructions on the product's SDS |
| It is safe to assume that asbestos may be found in any facility constructed before? | 11980 |
| True or False? You should use a compressor for an air test on high-voltage gloves because it has more pressure and is much faster. | Fasle |
| There are six classes of rubber protective equipment. List the six classes and their voltage ratings. | Class 00, Class 0, Class 1, class 7, class 3 and class 4 |
| All conductors, buses, and connections should be considered until proven otherwise? | Energize |
| The distance from the ladder feet to the base of the wall or support should be about________ top of the ladder. | one fourth of vertical height the vertical distance from the bottom to the |
| List the general guidelines used in identifying a confined space. | large enough to enter work, limited or restricted means of entry, not designed for continuous occupancy |
| Before determining the proper procedure for confined space entry, an) must be performed. | Hazard assessments must be performed |
| as erected each part of scaffolding should be? | inspected |
| CFR 1910 covers the | general industry standards |
| CFR 1926 covers the | construction standards |
| What is the focus four? | fall hazards, electrical hazards, caught in or between hazards, struck by hazards. |
| Safety on the job is considered what? | A condition of employment — no shortcuts, exceptions, or excuses. |
| What must be done before every job begins? | A Job Safety Analysis (JSA) to identify hazards. |
| Name at least 4 types of PPE that may be required on a jobsite. | Hard hats, safety glasses, gloves, steel-toe boots, arc-rated clothing, hearing protection, face shields. |
| Wearing damaged or incorrect PPE is the same as what? | Not wearing PPE at all. |
| list 3 electrical hazards. | Shock, arc flash, arc blast, burns, fire. (Any three) |
| What should you never assume about equipment? | hat it is de-energized. |
| What is the rule before touching electrical equipment? | Always test before touch. |
| When is Lockout/Tagout (LOTO) required? | Anytime unexpected energization could occur. |
| Who is allowed to apply or remove LOTO devices? | Authorized personnel only. |
| What kind of tools should be used for electrical work? | Insulated, properly rated tools in good condition. |
| What should you do if a tool or cord is damaged? | Remove it from service immediately. |
| Good housekeeping helps prevent what type of injuries? | Trips, slips, and falls. |
| How should work areas be kept at all times? | Clean and organized. |
| What are 3 ladder safety requirements? | Inspect them, secure them, and use them properly. |
| is it ever okay to bypass safety guards or devices? | no never |
| What should you do if you see an unsafe condition? | Report it immediately |
| “Silence equals acceptance of risk” means what? | If you don’t report hazards, you’re accepting the danger. |
| What is Stop Work Authority? | The right to stop work immediately if something is unsafe — no permission needed. |
| Is horseplay allowed on the jobsite? | No. It’s a professional work environment |
| Workers should know what emergency procedures? | First aid, fire response, exits, and reporting procedures. |
| Are most accidents random or preventable? | Preventable |
| Most injuries result from what? | Unsafe acts or unsafe decisions. |
Created by:
thomasalaija