Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
press water
fresh water system pressure test
| Question | Answer |
|---|---|
| 1. use ___ | PPE |
| 2. take out ___ water screen and ensure all ____ -____ drains are closed | city, low-point |
| 3.put hose in gravity water fill connection, fill ___ to verify ___ operation | tank, vent |
| 4.fill fresh water ___ until all probes ___ on panel | tank, illuminated |
| 5. turn on ____ and determine water flow by ___ a faucet | pump, opening |
| 6. put hose in city ___ connection and turn on | water |
| 7. turn on all ____ (exterior and interior) to ensure water delivery | faucets |
| 8. turn off ___ water and remove _____ screen | city , inlet |
| 9. turn water ___ off | pump |
| 10. release system ____ by opening a _____ | pressure, faucet |
| 11. ensure ______ is not in bypass mode ( to ensure that it runs there to check for leaks too) | water heater |
| 12. attach ____ to ___ water inlet | tester, city |
| 13.disconnect ___ and accumulator and close all faucets and ___ | icemaker, drains |
| 14.inject air between ____ to ____ psi and wait ____ minutes | 80 to 100 , 10 |
| 15.no drop in pressure = ___to continue to next test! | good |
| drop in pressure= leak somewhere so find and fix then ___ | retest |
Created by:
HR436