Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
LEED SS IV
LEED - Material and Resources Questions
| Question | Answer |
|---|---|
| How much space should the architect set aside for recycling center for a 25,000 square foot office? 1.An area that will handle the anticipated amount of waste 2.At least 75 sqft on each floor 3.At least .5% of the occupied floor area 4.At least 175 sqft | 1.An area that will handle the anticipated amount of waste |
| Which of the following materials must be recycled for LEED? (Select 3) 1.Metals 2.Glass 3.Carbboard 4.Electronics 5.Batteries | 1.Metals 2.Glass 3.Carbboard |
| A construction project is renovating an existing building but will not qualify for credit under Building Reuse. But reused existing building material may contribute toward: 1.Recycled content 2.Salvaged materials 3.Material diverted from a landfill | 3.Material diverted from a landfill |
| A building renovation that will remain existing walls, floors, and roof could contribute toward: (Select 2) 1.Regional content 2.Construction Waste Management 3.Building Reuse 4.Rapidly Renewable Materials 5.Material Reuse | 2.Construction Waste Management 3.Building Reuse |
| An interior non-structural wall w/ no windows or doors is to be retained as part of a renovated building. The wall is 10 ft long and 8 ft tall. What surface area should be counted towards Building Reuse? 1.80 sq ft 2.100 sq ft 3.160 sq ft 4.200 sq ft | 3.160 sq ft |
| What structural building elements can be used to achieve Building Reuse? (Select 3) 1.Foundation/Slab on Grade 2.Resillient Flooring 3.Gypsum Board Ceilings 4.Exterior Walls 5.Roof Deck 6.Interior Furniture | 1.Foundation/Slab on Grade 4.Exterior Walls 5.Roof Deck |
| A 10,000 square foot building adding a 70,000 square foot addition is not eligible for which of the following: 1.Building reuse 2.Material reuse 3.LEED certification 4.Regional materials | 1.Building reuse |
| Which of the following items from an existing building would qualify as interior non-structural elements? (Select 4) 1.Wall Partition 2.Casework 3.Interior Door reused as a countertop 4.Floor Decking 5.Carpet 6.Interior Door | 1.Wall Partition 2.Casework 5.Carpet 6.Interior Door |
| Which of the following is a true statement about Construction Waste Management? 1.Land clearing debris can be included 2.Commingled recycled waste cannot be included 3.Construction crews should be trained about proper waste separation and recycling | 3.Construction crews should be trained about proper waste separation and recycling |
| Which of the following is NOT necessary for a good project waste management plan? 1.Requirements for the use of low VOC paints 2.A central place for cutting materials 3.Requirements for material storage 4.A job site training program | 1.Requirements for the use of low VOC paints |
| Which of the following is not part of calculations for Construction Waste Management? 1.Concrete crushed and reused on site 2.Waste sent to landfill 3.Plastic wrapping collected and recycled 4.Trees removed from the site | 4.Trees removed from the site |
| Workstations salvaged from a nearby building would contribute toward: 1.Material reuse and recycled content 2.Material reuse and regional materials 3.Buidling reuse and regional materials 4.Building reuse and recycled content | 2.Material reuse and regional materials |
| By what method should reused materials be tallied? 1.Cost 2.Square footage 3.Volume 4.Weight | 1.Cost |
| Which of the following would NOT be eligible to contribute to Materials Reuse? 1.Tile flooring purchased from a salvage company 2.Refurbished door hardware from the site’s existing building 3.New Wood Flooring made from 100% recycled material | 3.New Wood Flooring made from 100% recycled material |
| Which of the following is an example of pre-consumer recycled content? 1.Crushed concrete used as fill 2.Structural steel made from old cars 3.Carpet manufactured from carpet scraps 4.Fly-ash from a coal burning power plant | 4.Fly-ash from a coal burning power plant |
| Which standard is used to define pre-consumer and post-consumer recycled content? 1.Green label 2.EPA 3.ISO 14021 4.ASHRAE | 3.ISO 14021 |
| Which of the following is eligible for an innovation point for exemplary performance? (Select 3) 1.Recycled content 2.Measurement and Verification 3.Material Reuse 4.Regional Materials 5.Storage and Collection of Recyclables | 1.Recycled content 3.Material Reuse 4.Regional Materials |
| A building makes use of structural timbers salvaged from a project site 150 miles away. To which credits can this be applied? 1.Regional Materials only 2.Material Reuse and Regional Materials 3.Recycled content and Material Reuse | 2.Material Reuse and Regional Materials |
| A county nature center located in a park uses wood from a nearby demolished barn. Which of the following credits might be impacted? (Select 2) 1. Rapidly Renewable Materials 2.Material Reuse 3.Certified Wood 4.Regional Materials 5.Building Reuse | 2.Material Reuse 4.Regional Materials |
| Which of the following might be considered a rapidly renewable material? (Select 3) 1.Composite Wood Panels 2.Bamboo 3.Cotton 4.Linoleum 5.Southern Yellow Pine | 2.Bamboo 3.Cotton 4.Linoleum |
| Which of the following are rapidly renewable materials? (Select 3) 1.Certified wood 2.Natural Rubber 3.Wool 4.Cork 5.Maple | 2.Natural Rubber 3.Wool 4.Cork |
| A rapidly renewable material must have a growth cycle of less than: 1.7 years 2.10 years 3.15 years 4.2 years 5.5 years | 2.10 years |
| Which of the following may NOT qualify as a source of rapidly renewable material? (Select 2) 1.Wool Carpeting 2.Oriented Strand Board (OSB) 3.Cotton Batt Insulation 4.Bamboo Flooring 5.Medium Density Fiberboard (MDF) Cabinets | 2.Oriented Strand Board (OSB) 5.Medium Density Fiberboard (MDF) Cabinets |
| The Forest Stewardship Council (FSC) is responsible for: 1.Ensuring forests are sustainably managed 2.Certifying low VOC furniture 3.Reseeding forests to offset carbon emissions 4.Certifying wood as rapidly renewable | 1.Ensuring forests are sustainably managed |
| Bamboo flooring and furniture made from post-consumer aluminum would contribute toward: (Select 2) 1.Certified Wood 2.Recycled Content 3.Rapidly Renewable Materials 4.Material Reuse | 3.Rapidly Renewable Materials 4.Material Reuse |
| Which of the following uses of certified wood are NOT acceptable? 1.Furniture made with FSC certified lumber 2.FSC certified wood used as scaffolding on another project that also claimed this credit 3.FSC certified plywood used for subflooring | 2.FSC certified wood used as scaffolding on another project that also claimed this credit |
| A piece of pine trim has the Forest Stewardship Council (FSC) logo followed by a number. What does the number represent? 1.The forest where the lumber was harvested 2.The vendor’s chain-of-custody certificate number 3.The mill that processed the lumber | 3.The mill that processed the lumber |
| What organization is responsible for ensuring that forests are sustainable harvested? 1.USGBC 2.EPA 3.Forest Stewardship Council 4.ASHRAE | 3.Forest Stewardship Council |
Created by:
catellee