click below
click below
Normal Size Small Size show me how
0 9 -- hw 7
HomeWork 7
| Question | Answer |
|---|---|
| Why are the tubes in deicer boots alternately inflated? - - Alternate inflation of deicer boot tubes keeps disturbance of the airflow to a minimum. - - Alternate inflation of deicer boot tubes does not disturb airflow. - - Alternate inflation of deicer boot tubes relieves the load on the air pump. | Alternate inflation of deicer boot tubes keeps disturbance of the airflow to a minimum. |
| What system component aids in the prevention of carburetor icing? - - Alcohol injection nozzle. - - Bleed air valve. - - Air diverter butterfly. | Alcohol injection nozzle. |
| Why should a chemical rain repellant not be used on a dry windshield? - - It will etch the glass. - - It will restrict visibility. - - It will cause glass crazing. | It will restrict visibility. |
| What is the principal characteristic of a windshield pneumatic rain removal system? - - An air blast spreads a liquid rain repellant evenly over the windshield that prevents raindrops from clinging to the glass surface. - - An air blast forms a barrier that prevents raindrops from striking the windshield surface. - - A pneumatic rain removal system is simply a mechanical windshield wiper system that is powered by pneumatic system pressure. | An air blast forms a barrier that prevents raindrops from striking the windshield surface. |
| What mixture may be used as a deicing fluid to remove frost from an aircraft surface? - - Ethylene glycol and isopropyl alcohol. - - Methyl ethyl ketone and ethylene glycol. - - Naphtha and isopropyl alcohol. | Ethylene glycol and isopropyl alcohol. |
| Which of the following is the best means to use when removing wet snow from an aircraft? - - A brush or a squeegee. - - Hot air. - - Warm water. | A brush or a squeegee. |
| What are three methods of anti-icing aircraft windshields? - - An electric heating element in the windshield, a heated air circulating system, and windshield wipers and anti icing fluid. - - A blanket-type heating system, an electric heating element in the windshield, and a ribbon-type Heating system. - - An electric heating element in the windshield, a heated air circulating system, and a hot water system. | An electric heating element in the windshield, a heated air circulating system, and windshield wipers and anti icing fluid. |
| What icing conditions may occur when there is no visible moisture present? - - Injector ice. - - Inlet ice. - - Carburetor ice. | Carburetor ice. |
| What should be used to melt the ice in a turbine engine if the compressor is immobile because of ice? - - Deicing fluid. - - Anti-icing fluid. - - Hot air. | Hot air. |
| What is used as a temperature-sensing element in an electrically heated windshield? - - Thermocouple. - - Thermistor. - - Thermometer. | Thermistor. |