Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Prac Exam 6
| Question | Answer |
|---|---|
| Which part of the air conditioner can generally be expected to last the longest? | Condenser coil |
| If you notice that a water heater is rusting, it may be appropriate to state in your report that it is beginning to deteriorate and may need to be replaced soon. | TRUE |
| Flue liners are used to protect chimneys from ______, _______ and _______? | rain, condensation and excess fuel |
| A home inspector should recommend that a home’s chimney be looked at by whom? | A certified chimney sweep |
| The operation and safety concerns regarding washers and dryers are not included in a standard inspection so long as that is outlined in your pre-contract agreement. | TRUE |
| Noise in a water heater tank is generally caused by ______? | Sediment accumulation |
| Your written home inspection report should be the same as the verbal summary you provide your client. | TRUE |
| You will use which instrument during a home inspection? | Flashlight Voltage sniffer Thermal image camera All of the above |
| Walking on a roof could void roofing warranties. | TRUE |
| “Further inspection is needed” should be written in your report if you believe the standard inspection is insufficient for a certain component or system. | TRUE |
| Draining and grading do not impact the structural integrity of a home. | False |
| What component redirects rainwater expelled by a downspout? | Splash block |
| Thermal pane windows should be replaced when? | When the window is cloudy |
| 14. Chimneys that are too short can be dangerous due to improper venting and the potential for CO poisoning. | TRUE |
| Engineered glulam beams and wood I-joists can carry greater loads over longer spans than is possible with solid sawn wood of the same size. | TRUE |
| Indicating an attic’s insulation to have a high R-value is a preferred finding to include on your report. | TRUE |
| Which of the terms below are associated with masonry? | Apron Travertine Anthropic All of the above |
| Dropped, tray and cove ceilings do not require special installation techniques. | False |
| Of the components below, which can you expect to have the shortest service life span? | Steel boiler |
| Which of the following can you include in an inspection report? | Routine maintenance ideas, conditions, deficiencies, seasonal maintenance recommendations |
| Home inspectors may only provide what kind of opinions with regards to observations and recommendations in the inspection report? | Objective and unbiased |
| Which of the following descriptions are considered visual observations? | Swelling siding Stucco deterioration Water stain All of the above |
| Inspection reports should include information about deficiencies, recommended maintenance and materials used during construction. | TRUE |
| Which of the following is a reason to include photographs with an inspection report? | Provide a visual location of main shut-offs Provide substantiation of findings Provide a description of the home's floor plan All of the above are appropriate reasons |
| The position/orientation of a home can impact the condition of the home. | TRUE |
| Which of the following materials is commonly found in crawl spaces? | Visqueen |
| Home inspectors are only able to perform limited inspections if a home is occupied when you conduct an inspection. | TRUE |
| ABS plastic is made up of what chemicals? | Acrylonitrile, butadiene, and styrene |
| The primary purpose of seismic straps is to prevent water heaters from moving. | TRUE |
| Which of the following statements about knob-and-tube wiring is true? | It has no inherent safety risks. It is not permissible in new homes. Both A and B are true. |
| Industry standards are used to both perform inspections AND prepare home inspection reports. | TRUE |
| What types of material are MOST likely to develop mold when exposed to moisture? | Cotton, paper, wool |
| Tiebacks that anchor retaining walls may also be referred to as___________? | Dead men |
| Which component listed below has the potential LONGEST expected service life? | Heat exchanger |
| Which of the following generally causes pinhole leaks in service pipes made from brass? | Leaching zinc |
| Stucco siding can only be applied to straight surfaces and requires a minimum of four coats. | False |
| A circuit breaker will generally trip more frequently when the electrical service is less than 100 amps at 110/220 volts. | TRUE |
| What is the primary reason a bathroom requires ventilation? | To prevent mold development |
| Various species of ants, termites and beetles may cause damage to wood homes. | TRUE |
| Which of the following areas DOES NOT require ground-fault circuit interrupters (GFCIs)? | Living room |
| A pitched roof may sag in various sections due to insufficient spacing of frame supports, structural failures and/or inadequate bracing of the ridge beam. | TRUE |
| What are the most common types of siding found on American homes? | Brick, aluminum, vinyl, wood |
| Every home inspection should begin in an attic. | Every home inspection should begin in an attic. |
| While inspecting the exterior of a home, you can expect to see which of the following? | Fascias Eaves Soffits All of the above |
| When you inspect the roof of a home, you are inspecting only for the expertise of the roofing contractor. | False |
| Most American homes have what type of shingles on roofs? | Asphalt |
| Slate shingles have the longest expected service life. | TRUE |
| Home inspectors are required to inspect chimney interiors and antennas on the roof. | False |
| Jalousie is a type of front door. | False |
| You are not required to inspect the connections of a washing machine. | TRUE |
| The kitchen, the laundry room and all bathrooms must be inspected during a home inspection due to the need to identify deficiencies in their plumbing systems. | TRUE |
| Which of the following are part of the overall plumbing system? | Ventilation system, waste system, drain system |
| The hot water supply system and water heating equipment are considered part of the plumbing inspection. | TRUE |
| When inspecting the plumbing system you should inspect the following: | vent systems, flues, chimneys |
| It is possible that aluminum siding might need to be grounded. | TRUE |
| Wood decay is most often caused by which of the following? | Excessive exposure to moisture |
| Deficient systems or components may need to be repaired regardless of the duration of the problem. | TRUE |
| What is the maximum acceptable height difference between risers for stair safety? | 1/4" |
| If you notice that the home owner has erected additional walls, including divider walls, it is appropriate to ask for documentation that the addition was approved by an engineer. | TRUE |
| Picture windows are most commonly found in homes older than 30 years. | False |
| In the hallway outside of bedrooms is the best location for smoke detectors. | TRUE |
| Which housing feature is associated with flashing? | Roof |
| If you are inspecting the roof of a home, what defects should you look for? | Loose shingles Missing shingles Broken shingles All of the above |
| The most common type of defect found when inspecting roof vents is water leakage. | TRUE |
| The type of shut off valve on a water heater can vary depending on the type of water heater. | TRUE |
| Materials generally not used for gutters include which of the following? | Leather Wool Snakeskin All of the above |
| When inspecting skylights you are looking for corrosion on the frame and cracked panes of glass. | TRUE |
| Fiber-cement siding is known to be dependable. When performing a home inspection with this type of siding you will most often find that it has not warped or rotted. | TRUE |
| Furnaces, radiators and baseboard registers do not have to be included in the home inspection. | False |
| Retaining walls that don’t use mortar during the construction process are called _____? | Dry stacked retaining wall. |
| Chinese drywall can sometimes cause an odor that resembles rotten eggs. | TRUE |
| Which of the following are types of heating systems? | Hydronic Steam radiant Radiant heat All of the above |
| Central heating is the most common type of heating you can expect to find during your home inspections. | TRUE |
| Air in forced air heating systems can be heated using which method? | Electricity Oil Propane All of the above |
| Central heating systems are the most popular because the system can be used for both heating and cooling. | TRUE |
| You should not turn on air conditioning units during cold weather when inspecting air cooling systems. What should the outdoor temperature be before you test these units? | At least 60 degrees |
| Which of the following is a common problem associated with electronic air filters? | Need to be cleaned often |
| Which of the following descriptions is NOT a common deficiency associated with rain gutters? | Absence |
| Vent stacks are components of which of the following systems? | Plumbing system |
| Which of the following structures require inspection? | Floor structures Wall structures Ceiling structures All of the above |
| Which of the following ceiling defects is NOT a cause for concern? | Paint discoloration |
| Where is the BEST location for a light fixture that illuminates a stairway? | Depends on the stairway |
| Which of the following examples is a common type of foundation system? | Basement Slab Crawl space All of the above |
| How is a typical basement constructed? | Concrete is poured in the beams, then the walls, then in the slab inside the walls. |
| What is the theory of heat transfer? | Heat can be transferred by conduction, convection, and radiation. |
| What is delaminating and where is it likely to occur? | It is the deterioration of wood trim or wood surfaces on windows and doors. |
| How would a home inspector use a moisture meter during an inspection? | To determine if there is excess moisture in wood |
| When inspecting a brick veneer wall, which of the following aspects is especially troubling? | Loose metal ties that are no longer secured to the wall |
| Which of the following is a basic principle of the theory of refrigerant cycling? | That energy is converted, not created |
| Which of the following fireplace components are NOT required to be inspected? | Fire screens Flue interior Mantles All of the above |
| When is the ideal time to replace planks on wood decks? | When it is necessary |
| What is a fascia? | A board situated under the edge of a roof |
| There are several different types of pests you might encounter during a home inspection. Which of the following is the most destructive? | Formosan termite |
| What type of safety control is required on water heaters? | Temperature and pressure relief valve |
| When inspecting the electrical system, you need to know about electrical amperage. Which of the following is the BEST definition of electrical amperage? | It is the power of an electrical current. |
| Where is the most common place to find plumbing-related damage in the bathroom? | Near shower fixtures |
| It is not unusual for foundations to become compromised because the surrounding soil has insufficient grading. Which of the following is the BEST grade allowance? | At least 1" per foot for six feet |
| What is the ideal tread run for stairs? | 12" |
| Which of the following defects can result in serious safety problems in the bathroom? | Water damage on floor around toilet |
| Which of the following elements is NOT a common characteristic of a railing system? | Balcony |
Created by:
: )