Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or

show password
Forgot Password?

Don't have an account?  Sign up 
Sign up using Clever
or

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Prac exam 3

C Exam Prep M.1

QuestionAnswer
When the footing and floor are poured simultaneously, this is called a monolithic slab.
Poor drainage causes what percentage of foundation problems? 0.8
Transpiration is the removal of moisture from the soil. True
It is the responsibility of the inspector to detect visible evidence of wood damage. It is the responsibility of the inspector to detect visible evidence of wood damage.
That portion of the foundation that transfers the structural load to the ground is the footing.
Drain tile at the base of a foundation should be covered with gravel.
To prevent settlement of expansive clay soil, a requirement is water.
When moisture in soil freezes, the soil expands.
Movement of a foundation in an expansive soil may be caused by poor drainage. a plumbing leak. nonuniform watering. all of the above
A tree growing too close to a house is a clue to check the foundation closely in that area. True
A moisture maintenance program for silty soil may cause foundation failure. True
Softwood trees include pine. fir. cedar. all of the above
Decay and dry rot develop when moisture conditions exist. True
Musty smells are associated with high humidity and decay. True
A 2″ x 4″ board used as a stud would be 5/8″ X 3 1/2″ because of surfacing operations. True
Which of the following items should an inspector write on the inspection report? Beam that does not rest on a pier Twisted floor joist Signs of wood rot All of the above
The truss roof system has four parts. True
In building a frame or wooden skeleton, studs rest on the sills, which are secured to the foundation wall. True
Plugging vents in a pier-and-beam house may cause moisture and mildew problems in the crawlspace.
Exterior walls of a frame residence include wooden members called studs.
Windows and doors do not require flashing on homes with contemporary wood siding. False
Minimum chimney height above the roof line is three feet. True
Water penetration into a home may be caused by a leaking roof. improper drainage. windows and doors not properly flashed. all of the above
All wood contains water. True
Fungi and termites are often found together because they require similar environmental conditions. True
A real estate inspector must be familiar with registered grade trademarks. True
A non-pressure wood preservative process is acceptable for lumber used in contact with the ground. False
Decay fungi cannot seriously damage wood that has a moisture content below what percentage? 0.2
The system of construction in which studs are continuous from foundation to roof is generally termed balloon framing.
The board that rests on the perimeter of a concrete slab floor would be the sill plate.
The maximum allowable moisture content of seasoned lumber is 0.19
Rafter boards pulling away from the ridge board may indicate foundation movement. True
Some woods demonstrate a natural resistance to fungus attacks. True
Floor systems using steel channels require bridging to prevent racking. True
The metal channel that supports the metal studs is called track.
Where would you find the heel-joint connections? Ceiling joist connection to rafter
Cold form steel has a galvanized coating to protect it from corrosion. True
The most common areas where failures develop in EIFS are chimneys. roof rakes. around windows and doors. all of the above
EIFS should be a minimum of ________ above finish grade. 8 inches
Sealants used to repair EIFS walls should be approved by the manufacturer. True
Ladders can dent, puncture, or scar EIFS. True
Backwrapping onto the back side of the insulation board should be a minimum of 2 1/2″. True
Which roof has four sloping surfaces to the eaves? Hip
How many square feet in a square of roofing? 100
Older untreated cedar shingles have what class UL fire rating? No fire rating
An individual should observe sunlight through a wood shingle roof. True
A wood shingle roof must be at least three layers thick. True
A cedar shake roof requires no underlayment. False
Granules in asphalt shingles protect the shingles from the sun’s rays. True
What type of decking may sustain asphalt composition shingles? Old wood shingles Old composition shingles Solid plywood decking All of the above
Built-up roofing should not be used on roof slopes of 4/12 or steeper. True
Slate and tile roofs require underlayment. True
What is the UL classification of slate and tile roofs? A
A galvanized steel roofing panel does not require painting. False
A stainless steel roof is all but maintenance free. True
The metal roof panels can be furnished in various lengths up to 24'
When a metal roof is installed over a composition shingle roof, the old roof serves as natural ventilation.
When inspecting a metal roof, the inspector should report all improper nailing.
Real estate inspectors may open any seals or locks on city water meters. False
All water heaters must have a temperature-pressure relief valve installed. True
What material cannot be used for the temperature-pressure relief valve line? PVC plastic
A plumbing trap prevents which of the following from entering the house? Sewer gas
What type of plumbing trap would you expect to find under a sink? P-trap
A trap may lose its water seal by siphonage. back pressure. evaporation. all of the above
A commode has a built-in trap. True
A commode that is loose on the floor should be reset with a new wax seal. True
An inspector should test the tile around the shower for loose spots or leaks. True
In which of the following may a cross connection occur? Outside faucets
Fiberglass and steel showers require shower pans. False
Minimum size of a grease trap interceptor is 100 gallons.
The difference between a Class I and Class II aerobic treatment plant is that Class II cannot be used for surface application.
Site service visits for aerobic plants should include an evaluation of the process operation.
In an electrical circuit, voltage forces electricity to flow to all appliances. True
Amperage is a flow of electrons required to produce operation of an electrical appliance. True
A complete electrical circuit must have oltage. load. path. all of the above
The service entrance is where electric power lines enter the house. True
Electrical wires must clear all flat roofs by how many feet and driveways by how many feet? 8; 12
Two-wire service will be only _______ service. 115V
The electric service panel delivers power only to 240V appliances. False
Copper is a better conductor of electricity than aluminum. True
What is the amperage of 14-ga copper wire? 15
What is the amperage of 12-ga aluminum wire? 15
GFCI-protected receptacles are found in bathrooms. swimming pool areas. outside receptacles. all of the above
Voltage is the measure of force at which electricity is delivered. True
Electricity is sold in quantities of kilowatt hours.
Three-prong outlets do not require grounding. False
The inspector should remove the electrical panel cover to observe proper wire size per circuit breaker. condition of insulation on the conductor. type of wire. all of the above
If the house has only two wires that run from the power pole, the service is limited to 115 volts.
The EER designation as applied to an air-conditioner refers to energy efficiency ratio.
To operate properly, evaporative coolers require a low relative humidity. True
A conventional heating/cooling thermostat is acceptable for heat pumps. False
When inspecting a high efficiency heat pump with an electronic control panel and thermostat, the thermostat temperature setting should never be moved more than 4°F in either direction. True
A geothermal system is more efficient year-round than a standard heat pump. True
In a geothermal system, the evaporator section absorbs energy and the condenser section releases energy. True
The length of the ground loop is determined by the type of soil and the building’s heating and cooling loads which are based on size. design. construction. all of the above
Whether the ground loop is most efficiently installed depends on the type of soil. True
The ground loop consists of several lengths of _____________ pipe. polyethylene
The cost of installing the ground loop is the same for horizontal trenches, vertical boreholes, or submerger in a pond. False
A geothermal system in heat mode can produce heated air in excess of 100°F. True
A kitchen exhaust using a blower is more efficient than one using a fan. True
Created by: : )
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards