Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
ch 29
light cured gels
| Question | Answer |
|---|---|
| Light cured gel enhancements rely on ingredients from the----- family | monomer liquid and polymer powder |
| Light cured gels contain-----, which are liquids | monomers |
| urethane acrylate and urethane methacrylates are used in making | UV gels |
| what step makes light cured gel nail enhancements different from all other nail enhancements | curing |
| applying gel over the entire surface of the nail is called the | one color method |
| gels that are used to enhance the thickness of other gels are | self-leveling gels |
| UV gels cure with a tacky surface called an | inhibition layer |
| light cured gel product is held and spread with | flat bristles |
| what product is used to improve adhesion of UV gels to the natural nail plate | UV gel primer |
| gel nails are contoured using a------abrasive | medium/fine |
| the measure of how much electricity a UV or LED bulb consumes is called | wattage |
| what is the most common UV bulb on the market | 9- watt |
| Light cured gel nail enhancements are customarily maintained----weeks after the initial application | two |
| Gels that are removed fairly easily with acetone are | soft UV gels |
| UV and LED gel nail enhancements can be removed by reducing thickness w/ a medium abrasive, soaking in acetone or product remover, and | gently scraping w/ a wooden pusher |
| An -----is a short chain of monomer liquids that is often thick, sticky, and gel-like and is not long enough to be considered a polymer | oligomer |
| what is the most common UV bulb on the market | 9-watt |
| Light cured gels are usually packaged in opaque pots or | squeeze tubes |
| the tacky surface left on the nail after a UV or LED gel has cured is called the | inhibition |
| a------ is recommended to refine the surface contour for UV or LED gel nails | medium or fine abrasive |
| viscosity is the measurement of the ------of a liquid and how the fluid flows | thickness |
| which of these products is used to increase adhesion of UV or LED gels to the natural nail plate | bonding gel |
| introducing air into the gel as you apply it to the fingernail will | reduce the strength of the cured gel |
| which of these is a thick-viscosity resin that allows the cosmetologist to build an arch and curve into the fingernail | building gel |
| a chemical called ---- initiates the polymerization reaction | a photoinitiator |
| when gel polish is finished curing, a ------can be applied over it to create a high, lustrous shine | gloss gel |
| which of these UV or LED gels cannot be removed w/ a solvent | Hard LED and UV gels |
| which type of gel is also known as soakable gel | Soft UV and LED gel |
| light cured gels | can be easy to maintain |
| a very thin-viscosity gel that is used as an alternative to traditional nail lacquers is | a gel polish |
| there are many names for glossing gels, but they do not include which of the following | layer gel |
| if a light unit has four bulbs in it, and each bulb is 9-watts, then the lamp is called a ---- lamp | 36- watt (9x4=36) |
| different bulbs produce greatly differing amounts of UV and LED light. this is referred to as the UV and LED bulb intensity or | concentration |
| after the nail plate is properly prepared for a light cured gel application, each layer of products applied to the natural nail, nail tip, or form and requires exposure to a UV or LED source to | cure or harden |
| gel polish | does not dry the same as laquers |
| the amount of colored pigment concentration in a gel is called | opacity |
| which product removes surface moisture and tiny amounts of oil left on the natural nail plate | nail dehydrator |
| if a client has flat fingernails, which type of product would be recommended | building gel |
| during a gel procedure, keep the brush and open gel containers away from sunlight, gel lamps, and | full-spectrum table lamps |
| most LED lamps cure gel about four times faster than UV lamps. what do the letters LED represent | light emitting diodes |
Created by:
cmcclure000