Which tasks can be accomplished by using the command history feature? (Choose two.)

Set the command history buffer size Recall previously entered commands

Which statement describes the system LED operation on Cisco Catalyst switches?

if the LED is amber, the system is receiving power but it is not functioning properly

A network administrator has configured VLAN 99 as the management VLAN and has configured it with an IP address and subnet mask. The administrator issues the show interface vlan 99 command and notices that the line protocol is down.

connect a host to an interface associated with VLAN 99

Which statement describes SVIs?

a default SVI is created for VLAN 1 for switch administration

Which router bootup sequence is correct?

1 - perform the POST and load the bootstrap program 2 - locate and load the Cisco IOS software 3 - locate and load the startup configuration file or enter setup mode

What is the first action in the boot sequence when a switch is powered on?

load a power-on self-test program

When configuring a switch for SSH access, what other command that is associated with the login local command is required to be entered on the switch?

USERNAME username SECRET secret

Help

Options

focusNode

Didn't know it?
click below

Knew it?
click below

Don't Know

Remaining cards (0)

Know

retry

shuffle

restart

0:00

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

mid term mod 1 cisco

Term	Definition
Which command will display a summary of all IPv6-enabled interfaces on a router that includes the IPv6 address and operational status?	show ipv6 interface brief
When verifying routes, what code is used to identify directly connected routes in the routing table?	c
Which command will display packet flow counts, collisions, and buffer failures on an interface?	show interface
An IPv6-enabled interface is required to have which type of address?	link-local
What character is used to enable the filtering of commands?	pipe \|
Which filtering expression will show all output lines starting from the line matching the filtering expression?	begin
Which tasks can be accomplished by using the command history feature? (Choose two.)	Set the command history buffer size Recall previously entered commands
Which statement describes the system LED operation on Cisco Catalyst switches?	if the LED is amber, the system is receiving power but it is not functioning properly
What type of Ethernet cable would be used to connect one switch to another switch when neither switch supports the auto-MDIX feature?	crossover
What advantage does SSH offer over Telnet?	encryption
A network administrator has configured VLAN 99 as the management VLAN and has configured it with an IP address and subnet mask. The administrator issues the show interface vlan 99 command and notices that the line protocol is down.	connect a host to an interface associated with VLAN 99
Which statement describes SVIs?	a default SVI is created for VLAN 1 for switch administration
Which prompt is displayed when a network administrator successfully accesses the boot loader on a switch to recover from a system crash?	switch:
Which router bootup sequence is correct?	1 - perform the POST and load the bootstrap program 2 - locate and load the Cisco IOS software 3 - locate and load the startup configuration file or enter setup mode
What is the first action in the boot sequence when a switch is powered on?	load a power-on self-test program
What must an administrator have in order to reset a lost password on a router?	physical access to the router
When configuring a switch for SSH access, what other command that is associated with the login local command is required to be entered on the switch?	USERNAME username SECRET secret
Which command will provide information about the status of all interfaces including the number of giants, runts, and collisions on the interface?	show interfaces

Created by: mjpsm

"Know" box contains:
Time elapsed:
Retries: