click below
click below
Normal Size Small Size show me how
Carpentry 1
Question | Answer |
---|---|
How many sixteens are in one inch? | Sixteen |
What can be used to make a trammel point if you do not have them? | a thin strip of wood with a brad through it for a center point or two nails and a framing square |
Level | Horizontal |
Plum | Vertical |
What can you use to see if something is level? | a level |
What can you use to see if something is plum? | Plum Bob |
The more teeth a saw has........ | the finer the cut |
cross cut saws | cut across the grain |
rip saws | cut with the grain |
Always place the router into the material | AGAINST the rotation of the bit |
Commonly used sand paper grit | 100 or 120 |
Advantages of Biscuit Joiners | Join wood with no visible fasteners, make different joints, can make custom sizes and larger pieces of wood |
Reciprocating Saw | used mostly for roughing in work or remodeling |
Masonry bites | are best used in a hammer drill and used for concrete |
How much longer should a nail be than the thickness of the material being used? | 3 times |
What can prevent splitting of the wood? | blunting the tip of the nail |
Block planes | can be held in one hand |
Scribing | laying out stock to fit against an irregular surface |
Coping saws | make coped joints for trim |
Framing nailers | generally use a gun that will handle both a 2 1/2 inch ardox nail and a 3 1/4 inch ardox nail. |
Pneumatic tools are | fueled by compressed air |