Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Cisco 2 Chapter 5

QuestionAnswer
Configure Router hostname (know the prompts) Router> then enableRouter# then config tRouter config #
3 modes/interfaces protect VTYConsolePrivelaged Exec Mode
(connection method requiring network functionality) Network has to be configured before you use this functionTELNET is one.
know tasks/info of history cmd You can set the history buffer size.Can recall previously entered commands
Router 1st boot displays? mode?
(valid config in NVRAM) Startup Config, you will access USER EXEC MODE
SDM express/GUI interfaceCmds to config without manual: IP negotiatedIP unnumbered
3 settings in SDM EXPress on basic config screen 1. host name2. domain name3. enable secret password
3 encapsulation types frame relayHDLCPPP
key or key combo to finish incomplete CMD: look up
Color of LED post failure on Switch (solid or blink): Amber solid
Know series of CMD's that will IP and SN Mask
R2(config)#: int s0/0/0IP address ---.---.---.--- ---.---.---.---.---
CMD to assign default gateway to switch IP default gateway ---.---.---.---
Know output of show IP interface brief CMD look up
If it says administratively down and the protocol is down Do a no shut cmd to bring interface back up.
Set of CMD's to allow administrator to telnet Interface VLan1Line VTY 0 15Enable secret classWill have IP and SNMask also
Rollover cable and console port type of cable
NVRAM and Cache reg ram Startup config goes into NVRam
2 statements about NVRAM Retains contents when power is removedStores start up configuration
Duplex Half/Full Problem when full duplex mode is slow? There is a mismatch. They need to be set the same.
Show port-security interface. Fast ethernet FA0/1Going to show you an output, know significance of the output.
What must be completed before port security is enabled (something about the interface switchport
Created by: paulysa
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards