Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
1102 final
Dawson final
| Question | Answer |
|---|---|
| What is the maintenance recording responsibility of the person who complies with an Airworthiness Directive? | Make an entry in the maintenance records of that equipment. |
| Where are technical descriptions of certificated engines found? | Engine TCDS |
| Placards required on an aircraft are specified in what document? | TCDS |
| Technical information about a specific propeller models, can be found in what? | Propeller TCDS |
| What publication or publications would a mechanic use to determine the fuel quantity and octane rating for a specific aircraft? | Airframe TCDS |
| FAA Airworthiness Directives are issued for what purpose? | to correct an unsafe condition that is likely to return and affects the same type design |
| Who issues Airworthiness Directives? | FAA |
| Suitability for use of a specific propeller with engine-airplane combination can be determined by reference to what source? | Aircraft specifications or (Aircraft TCDS) |
| What are Advisory Circulars by definition? | FAA provided guidance that is not regulatory |
| Airworthiness Directives are amendments to what? | FAR part 39 |
| What is the definition of an STC? | a supplemental type certificate is issued by FAA when an applicant has received approval to modify an A/C from it's original design. (Or more simply a change in type design) |
| An Airworthiness Directive has three sets of numbers, what does each set of numbers mean? | first part is year AD was issued; the second part is the biweekly period of the year when the AD was issued, the third part is when issued sequentially within each biweekly period. |
| When are Airworthiness Directive issued? | an unsafe condition exists in a product, and the condition is likely to exist or develop in other products of the same type design |
| Airworthiness Directives can be issued as? | either Emergency Airworthiness Directives (EAD) or Notice of Proposed Rulemaking (NPRM) |
| What publication is used to determine whether the correct engine is installed in an aircraft? | Airframe TCDS |
| Before a Minimum Equipment List can be obtained, the manufacturer must do what? | have it be approved by FAA |
| What is issued by the aircraft manufacturer to correct design defects that may exist in an aircraft? | service bulitin |
| A recurring AD would be one that is what? | repetitive due to nature of condition |
| What is A.T.A.Spec.100? | contains format and content guidelines for technical manuals written by aviation manufactures and suppliers, from transport category. |
| What products items may be type certificated? | propeller, Airframe, and engine |
| Malfunction and defect reports are compiled and sent out to the field as what? | Airworthiness alert |
| Who issues a services bulletin (SB)? | The Manufacture |
| Is an item of equipment installed under an STC a major or minor alteration? | Major alteration |
| What manual would a mechanic use to find the part number of a rudder hinge pin | IPC |
| What is the datum? | the zero-reference point that all measurements of an arm are referenced by |
| What is the formula for calculating weight and balance.? | W x A=M |
| By definition, what is the CG? | center of gravity of an A/C |
| If the nose gear is at station -10 in reference to the datum and the main gear is 167 inches aft of the nose gear ,at what station is the main gear? | +157 |
| What document can you use to find the datum for a specific aircraft model? | TCDS |
| If the datum is located at the aircraft firewall and the prop is at station -46 and the antenna you want to install is 195 inches from the firewall, at what station is the antenna | +195 |
| Given the following calculate the CG for the aircraft. Main gear 128. inches aft of the nose gear. Nose gear 12.75 inches forward of the firewall. Firewall 2 inches aft of the datum. Left main weight 673 lbs ,Right main 671 lbs, nose gear 274 lbs | 95.71 |
| Given the following calculate the CG for the aircraft. Main gear 195 inches aft of the nose gear. Nose gear 13.5 inches aft of the datum. Left main weight 671 lbs ,Right main 662 lbs, nose gear 228 lbs | 180.01 |
| Given the following information what station is the antenna located. Firewall is the datum. Vertical stabilizer 271. inches aft of the firewall antenna52 inches forward of the vertical stabilizer | +219 |
| Which are the two statements that can be used when signing off a 100 hour inspection? | I certify that this A/C has been inspected IAW 100hr inspection and (has been found to be in an airworthy condition) or (a signed and dated list of discrepancies has been provided to the owner/operator) |
| A shaft with the following measurements, diameter .450 +.009 and - .001 would have what minimum and maximum dimensions. | 0.459 max and 0.449 min |
| What is the F.S.D.O? | Flight standards district office |
| Which regulation provides the airworthiness standards for an airplane certificated in the normal category? | Tittle 14 part 43 |
| The following words are an example of what kind of statement in an AD? 'Required within the next 50hours time-in-service after the effective date of this AD, unless already accomplished | compliance |
| Under the Federal Aviation Regulations, an aviation maintenance technician is required to perform maintenance on an aircraft so that it is what? | at least equal to it's original/ properly altered condition |
| What type of line is normally used in a mechanical drawing or blueprint to represent an edge or object not visible to the viewer? | hidden line |
| The measurements showing the ideal or 'perfect' sizes of parts on drawings are called what? | dimensions |
| Where is the record of compliance with Airworthiness Directives or manufacturers' service bulletins normally indicated? | Aircraft maintenance records |
| If work performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes what? | approval for return to service |
| During an annual inspection, if a defect is found which makes the aircraft unairworthy, the person disapproving must do what? | Provide a written notice of the defect to the owner |
| When a 100-hour inspection is completed, if separate maintenance records for the airframe, powerplant(s), and propeller(s) are maintained, where is the entry for the inspection recorded? | in ALL the records |
| For aircraft operated under part 91, when is aircraft total time required to be recorded in aircraft maintenance records? | after satisfactorily completing inspections |
| Who is responsible for making the entry in the maintenance records after an annual, 100 hour, or progressive inspection? | The person approving or disapproving for return to service, more simply the person performing the inspection |
| What is the status of data used as a basis for approving major repairs or alterations for return to service? | data must be FAA approved prior to it's use for that purpose |
| When an FAA Form 337 is prepared. How many copies are required and what is the disposition of the completed forms? | 2, one for A/C owner/FSDO, and one for the FAA at Oklahoma City |
| Who is responsible for upkeep of the required maintenance records for an aircraft? | aircraft owner/ operator |
| An aircraft was not approved for return to service after an annual inspection and the owner wanted to fly the aircraft to another maintenance base what must he obtain? | a special flight permit of a ferry permit |
| Each person performing an annual or 100-hour inspection shall use a checklist that contains at least those items in what? | part 43 appendix D |
| What part of the Federal Aviation Regulations prescribes the requirements for issuing mechanic certificates and associated ratings and the general operating rules for the holders of these certificates and ratings? | part 65 |
| A certificated mechanic shall not exercise the privileges of the certificate and rating unless, within the preceding 24 months, the Administrator has found that the certificate holder is able to do the work or the certificate holder has done what? | worked 6 months out of the past 24 months while using their license |
| How long does the holder of a certificate issued under 14 CFR part 65 have to notify the FAA after any change in permanent mailing address? | 30 days mail to Oklahoma City |
| What is the normal duration a mechanic certificate with airframe and/or powerplant ratings? | lifetime until suspended, surrendered, or revoked |
| Which FAR is Definitions and abbreviation | 1 |
| Which FAR General operating and flight rules | 91 |
| Which FAR is Repair Stations | 145 |
| Which FAR is repairman other than crew members | 65 |
| Which FAR is Airworthiness standards for products and parts | 21 |
| Which FAR is Airworthiness standards for normal and utility aircraft | 23 |
| Which FAR is Airworthiness standards for props | 35 |
| Which FAR is Airworthiness standards for powerplants | 33 |
| Which FAR is Maintenance | 43 |
| Which FAR would you find the size requirements for the N# | 45 |
| Which FAR is Airworthiness Directives | 39 |
| Which FAR is aircraft registration | 47 |
| Which tags by color are used for condemned parts | red |
| Which tags by color are used for servicable parts | yellow |
| Which tags by color are used for repairable parts | green |
| Which tags by color are used for identification of parts | white |
| Identify the line ------------------------------------------ | hidden |
| Identify the line _____________________________ | visible |
| Identify the lines ^ ^ | | | extension |
| Identify the line <________________________> | dimension |
Created by:
Lucas1999