Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
7 LEVEL CDC
MANAGEMENT PROCEDURE
| Question | Answer |
|---|---|
| 1-1) As a vehicle management (VM) work center supervisor, which are specific responsibilities that you have? | ENSURING PROPER TOOLS ARE READILY AVAILABLE, ASSIGNING WORK, EFORCING SAFETY PROCEDURES, AND MEETING TRAINING NEEDS |
| 1-2) Who is the focal point for coordinating and generating all work through your shop? | FLEET MANAGEMENT & ANALYSIS (FM&A) |
| 1-3) Aside from Fleet Management and Analysis (FM&A) and Material Control, what other two shops will "main-shop" supervisors coordinate with daily? | TIRE & BODY |
| 1-4) With whom should you communicate when vehicle repair work is delayed due to other shop priorities taking precedence? | VFM, VMS, & FM&A |
| 1-5) To whom is the mission-essential level (MEL) presented for final approval? | MISSION SUPPORT GROUP (MSG) COMMANDER |
| 1-6) When assigning work orders in accordance with priorities, which condition does not automatically cause a vehicle to have a higher priority than other vehicles? | EMERGENCY WARNING LIGHTS, MILITARY RADIOS, OTHER SUCH ACCESSORIES |
| 1-7) The section supervisor is responsible for ? | DISSEMINATING THE WORKLOAD TO THE SHOP |
| 1-8) What document accompanies a vehicle to the depot repair facility? | AN UPDATED COPY OF THE ORIGINAL LTI (AFTO FORM 91) |
| 1-9) Who specifically authorizes substitutions for vehicles already programmed for depot? | ROBINS AFB SPECIAL EQUIPMENT AND VEHICLES (SE&V) |
| 1-10) How many years are added to the life expectancy of a depot-overhauled vehicle? | 7 years |
| 1-11) What is the warranty period for all depot-overhauled vehicles? | ACCORDING TO SPECIFIC CONTRACT SPECIFICATIONS |
| 1-12) What guidance specifies the extent of completed work and types of repairs that receive quality assurance inspections? | LOCAL OPERATING INSTRUCTION (OI) |
| 1-13) Areas that you should consider prior to assigning an individual to perform quality assurance (QA) inspections are? | Have a 5-skill level or higher - Have a wide range of expertise -Be able to maintain process integrity (show no favoritism or bias) |
| 1-14) Which phrase best describes manpower? | THE TOTAL NUMBER OF JOBS OR POSITIONS REQUIRED TO ACCOMPLISH A PARTICULAR MISSION |
| 1-15) Choose the phrase that best describes personnel. | Personnel are the “faces,” people like you, who fill the required positions |
| 1-16) What is a vehicle equivalent (VE)? | A NUMERIC VALUE ASSIGNED TO A VEHICLE, BASED ON ITS MAINTENANCE COMPLEXITY |
| 1-17) Factors that affect manpower authorizations are called | VARIANCES |
| 1-18) Which statement best describes the man-hour availability factor (MAF)? | THE AMOUNT OF TIME AN INDIVIDUAL IS NORMALLY AVAILABLE TO DO THE TASKS IDENTIFIED IN THE MANPOWER STANDARD |
| 1-19) Which is a positive manpower variance? | positive variance compensates for the additional workload generated due to operational environment, mission, or technical requirements of the law |
| 1-20) Which is a negative manpower variance? | negative variance decreases your “normal” manpower authorizations when others are performing some workloads normally done by your shop |
| 1-21) What is one of the contributions you can make to supply discipline? | AVOID REQUESTING MORE THAN IS NEEDED |
| 1-22) The financial obligations to pay for the loss, damage, or destruction of a vehicle resulting from abuse is known as? | PERCUNIARY LIABILITY |
| 1-23) How many categories of properties are in the supply system? | TWO |
| 1-24) What document is used when outfitting a vehicle maintenance (VM) shop with equipment? | ASC 457 |
| 1-25) Items that are needed to outfit an individual stationed in a cold weather area are called? | INDIVIDUAL EQUIPMENT |
| 1-26) What is the code used to identify repairable cycle assets that primarily under depot-level control? | The XD coded items (e.g., some engines and gearboxes) are repaired and primarily controlled by the depots (the D stands for depot). |
| 1-27) Which publications is used to identify shop-specific equipment by type and quantity? | ASC 457 |
| 1-28) The Vendor Product Evaluation Program is designed to? | ENHANCE OPERATIONS BY IDENTIFYING MORE EFFECTIVE AND ECONOMICAL EQUIPMENT THROUGH FIELD EVALUATIONS |
| 2-29) As a work center supervisor, with whom would you work to create master training plans (MTP) and individual training plans (ITP)? | unit training manager (UTM) |
| 2-30) When would you review master training plans (MTP) and individual training plans (ITP)? | You and the UTM should review the MTP and ITP annually or any time there are changes to the career field education and training plan (CFETP). |
| 2-31) How often should the vehicle management (VM) training monitor review individual training plans (ITP) on upgrade trainees? | QUARTERLY |
| 2-32) Within how many days after a trainee is assigned to a work center would a supervisor's initial journal entry be documented in the training business area (TBA)? | 60 days |
| 2-33) Who does the training monitor work with to develop a rotational training plan? | VFM/VMS AND WORK CENTER SUPERVISOR |
| 2-34) What two areas does on-the-job training (OJT) consist of? | Career knowledge and task performance |
| 2-35) Which document gives a list of all of the shop's expenditures by element of expense-investment code (EEIC)? | RESPONSIBILITY CENTER/COST CENTER (RC/CC) MANAGER'S REPORT |
| 2-36) Who is responsible for controlling the vehicle management budget? | Vehicle management and analysis (VM&A). |
| 2-37) Which organization provides policy oversight for the Department of Defense (DOD) fleet credit card? | The Defense Energy Support Center (DESC) is the program manager and provides policy oversight for the DOD card. As |
| 2-38) The Department of Defense (DOD) fleet credit cared is reissued to customers in a new control register? | You must reissue all cards to customers in a new control register by 1 October each year. |
| 2-39) The Air Force (AF) Form 616, Fund Cite Authorization (FCA) is provided to the accounting liaison office (ALO) to report the projected estimate estimate of Department of Defense (DOD) fleet credit card non-fuel purchases? | QUARTERLY |
| 2-40) The Defense Property Accountability System (DPAS) places costs in the reimbursable-refundable file? | AS THE COSTS OCCUR |
| 2-41) Fleet Management & Analysis (FM&A) should furnish the base comptroller's budget office with a list of supported tenant organizations | AT THE BEGINNING OF EACH FISCAL YEAR AND WHEN A CHANGE IS REQUIRED |
| 2-42) Which statement best describes a vehicle maintenance (VM) function in support of the United States Air Force War and Mobilization Plan (WMP)? | ? |
| 2-43) What publication does the 441st Vehicle Support Chain Operations Squadron (VSCOS)use to manage war reserve material (WRM) vehicle assets? | 441 VSCOS manages WRM vehicle assets according to AFI 25–101 |
| 2-44) Who has overall base level responsibility to ensure the readiness of assigned war reserve material (WRM)? | INSTALLATION COMMANDER |
| 2-45) Who develops specific storage concepts for vehicles identified against operation plan (OPLAN) tasking? | MAJCOM (MAJOR COMMAND) |
| 2-46) A package of flyaway spare parts to be shipped with a vehicle before its departure is referred to as? | TMSK --- kit of flyaway spare parts that units with deployment vehicles must requisition, mark, and box to ship with each vehicle before its departure, support vehicle for at least 30 days |
| 2-47) An immediate, temporary repair of a battle-damaged vehicle during post-attack recovery operations is called? | TRIAGE MAINTENANCE |
| 2-48) In regards to vehicle maintenance (VM), on-scene repair is the goal of which maintenance concept? | Expanded mobile maintenance |
| 2-49) During wartime, which factor would most likely drive a lower standard of serviceability in vehicle management (VM) compared to peacetime operations? | Mission and spare parts availability |
| 2-50) Who may direct removal of a vehicle from service until an "outstanding" time compliance technical order (TCTO) has been accomplished? | 441ST VSCOS |
| 2-51) Where do you file the completed time compliance technical orders (TCTO)? | PERMANENT SIDE OF THE VEHICLE RECORD JACKET |
| 2-52) What program is used to access the current mission capable (MC) rate for your base? | (LIMS–EV) Use Logistics Installation and Mission Support Enterprise View ---- in the AF Vehicle Management Neighborhood to access the current mission capable (MC) rate status for your base. |
| 2-53) Which report contains data for all the registered and nonregistered vehicles for which vehicle management (VM) has primary responsibility? | VEHICLE MASTER INQUIRY |
| 2-54) Which report is used to keep track of work orders in the Defense Property Accountability System (DPAS)? | WORK ORDER MASTER INQUIRY |
| 2-55) Major commands (MAJCOM) must not exceed established vehicle ceilings without prior approval from | 441ST VSCOS |
| 2-56) Request for vehicle authorization changes are submitted on an | AF Form 601 -- change could be to increase, decrease, or establish a new authorization. |
| 2-57) The master vehicle report (MVR) breaks down vehicle authorizations by | PRIME NATIONAL STOCK NUMBER (NSN) |
| 2-58) Post changes to the Custodian Authorization/ Custody Receipt Listing (CA/CRL) | Draw a single line through the old data and enter the new data ------ enter action, equipment request control # & transaction serial # on CA/CRL |
| 2-59) Before making a decision on underutilized vehicles, you must consider? | DELETE THE AUTHORIZATION |
| 2-60) What vehicles are not included when conducting vehicle rotation analysis? | GSA & other leased vehicles |
| 3-61) What is the significant difference between the M1116 high-mobility, multipurpose wheeled vehicle (HMMWV) as compared to the other HMMWV models? | ARMORED BODY |
| 3-62) At what angle is the radiator mounted in a high-mobility, multipurpose wheeled vehicle (HMMWV)? | 45 DEGREES |
| 3-63) What high-mobility, multipurpose wheeled vehicle (HMMWV) drive train components transfer torque to the wheels from the differential through the geared hubs? | Half-shaft |
| 3-64) What high-mobility, multipurpose wheeled vehicle (HMMWV) drive train components act as the final drive components to front and rear wheels? | GEARED HUBS |
| 3-65) What high-mobility, multipurpose wheeled vehicle (HMMWV) suspension system component provides a gear reduction to increase torque to the wheel and tire assembly? | GEARED HUB |
| 3-66) What type of headlight switch do most M-series vehicle lighting systems use? | three-lever |
| 3-67) ) How many blackout light positions are on the high-mobility, multipurpose wheeled vehicle (HMMWV)? | 5 |
| 3-68) What provides a ground circuit to the alternator for the high-mobility, multipurpose wheeled vehicle (HMMWV) generating system? | CIRCUIT 3 |
| 3-69) How many forward and reverse gears are available when using the transmission in conjunction with the transfer case on the 2½-ton M-series? | Eight forward gears & Two reverse gears |
| 3-70) The air system on the 2½-ton M-series contains how many rear couplings? | 2 |
| 3-71) How do you unlock the throttle control setting on a 2½-ton M-series? | ROTATE HANDLE CLOCKWISE OR COUNTERCLOCKWISE |
| 3-72) What position should the 2½-ton M-series transfer case lever be in during heavy load operation modes? | PUSHED DOWN TO LOW POSITION |
| 3-73) What major component of the 5-ton M-series permits towing by another vehicle? | Lifting shackles |
| 3-74) What provides operating power for the auxiliary equipment on the 5-ton M-series truck? | HYDRAULICS |
| 3-75) Which component on the 5-ton M-series front winch engages the winch drum gear to the drive gear of the winch motor? | CLUTCH LEVER |
| 3-76) What major component of the 5-ton M-series medium wrecker is used to control the operating gear ratio of the rear winch drive motor? | TORQUE CONTROL LEVER |
| 3-77) What major component for raising and lowering the wrecker crane cable and hook guides the hoist cable through the boom? | SHEAVES |
| 3-78) The MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle can carry up to how many personnel? | 6 PERSONNEL |
| 3-79) Which areas, protected by the fire suppression system (FSS) on the MaxxPro MineResistant, Ambush-Protected (MRAP) vehicle, operate automatically? | ENGINE AND FIRE SENSORS |
| 3-80) Which area(s), protected by the fire suppression system (FSS) on the MaxxPro MineResistant, Ambush-Protected (MRAP) vehicle, can only be operated manually? | FUEL TANK AND TIRES |
| 3-81) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, which armor component is made of ceramic composite? | BASE CAB |
| 3-82) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, which armor component attaches externally to the base armor? | CATCHER PLATES |
| 3-83) ) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, which armor component attaches to brackets and is held several inches from the vehicle body? | EFFECTOR ASSEMBLIES |
| 3-84) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, to place the electronic gauge cluster (EGC) in diagnostic mode, turn the ignition switch to ON or | ON AND RESUME SIMULTANEOUSLY |
| 3-85) While in the electrical system diagnostic mode on the MaxxPro Mine-Resistant, AmbushProtected (MRAP) vehicle, what action is not required to clear diagnostic trouble codes? | HOLD THE SELECT/RESET BUTTON ON THE CLUSTER |
| 3-86) On the MRAP vehicle, you connect an air conditioning (AC) recovery/recharging unit to the vehicle while performing a COOL mode check during the life support and heating, ventilation, and air conditioning (HVAC) systems’ function check to | MONITOR PRESSURE |
| 3-87) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, what should the engine speed be during the COOL mode check while performing the life support and heating, ventilation, and air conditioning (HVAC) systems’ function check? | 1,300 RPM |
| 3-88) On the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle, what should the engine speed be during the VENT mode check while performing the life support and heating, ventilation, and air conditioning (HVAC) systems’ function check? | IDLE |
| 3-89) During the MaxxPro Mine-Resistant, Ambush-Protected (MRAP) vehicle fire suppression system (FSS) inspection, which of the following is not one of the three functional tests to be performed? | COMBINATION |
| 3-90) How much do the armor plates on the sides of the MaxxPro Mine-Resistant, AmbushProtected (MRAP) vehicle’s engine weigh? | |
| 3-91) The process of assessing damage, putting the priority vehicles first, and doing cannibalization or whatever it takes to get those vehicles back in commission is called | TRIAGE MAINTENANCE |
| 3-92) What level of triage maintenance requires more than 30 minutes of repair work but less than four hours? |
Created by:
paolamoyaa