click below
click below
Normal Size Small Size show me how
Forms / Publicatins
General Test
| Question | Answer |
|---|---|
| For aircraft operated under Part 91, which of the following records must be retained for at least one year, or until the work is repeated or superseded? | Records of maintenance, alterations, preventive maintenance, 100-hour, annual, and progressive inspections. |
| Which aircraft record entry best describes a repair of a dent in a tubular steel structure dented at a cluster? | Welded a reinforcing plate over the dented area. |
| When work is performed on an aircraft that necessitates the use of FAA Form 337, who should prepare the form? | The person who performs or supervises the work. |
| Which maintenance record entry best describes the action taken for a .125-inch deep dent in a straight section of 1/2-inch aluminum alloy tubing? | Dented section removed and replaced with identical new tubing flared to 37°. |
| Which aircraft record entry is the best description of the replacement of several damaged heli-coils in a casting? | Eight 1/4 -- 20 inch standard heli-coils were replaced. The damaged inserts were extracted, the tapped holes gaged, then new inserts installed, and tangs removed. |
| Where should you find this entry? 'Removed right wing from aircraft and removed skin from outer 6 feet. Repaired buckled spar 49 inches from tip in accordance with figure 8 in the manufacturer's structural repair manual No. 28-1.' | FAA form 337 |
| In order to reconstruct lost or destroyed aircraft maintenance records, what is it necessary to establish? | Total time-in-service of the airframe. |
| When approving for return to service after maintenance or alteration, the approving person must enter in the maintenance record of the aircraft | a description (or reference to acceptable data) of work performed, date of completion, the name of the person performing the work (if someone else), signature, certificate number, and kind of certificate held. |
| After a mechanic holding an airframe and powerplant rating completes a 100-hour inspection, what action is required before the aircraft is returned to service? | Make the proper entries in the aircraft's maintenance record. |
| If more space is needed for a work description entered on FAA Form 337, what information should be included on the attached sheet(s), in addition to the rest of the work description? | Aircraft nationality and registration mark, and the date the work was accomplished. |
| What is ATA iSpec 2200? | Standardized electronic documentation for aircraft models. |
| For aircraft operated under Part 91, which of the following records must be retained and transferred with the aircraft when it is sold? | Records of the current status of applicable ADs, and date and time when recurring ADs are next due. |
| Which maintenance record entry best describes the action taken for a control cable showing approximately 20 percent wear on several of the individual outer wires at a fairlead? | Wear within acceptable limits, repair not necessary. |