Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Radiology Board Q

QuestionAnswer
Which of the following are considered to be the most radioresistant? Muscles and nerves
Taking every prudent measure or precaution to prevent occupationally and nonoccupationally exposed persons from radiation is? ALARA
The aluminum filter in the x-ray unit tubehead reduces the dose of radiation by? Absorbing long wavelength low energy penetrating waves
Exposure to radiation can best be reduced for the patient by the use of? F speed film
The x-ray film packet filter that prevents film fog is usually made of? Lead foil
A herringbone or tire track pattern on a radiograph is a result of? Improper film Placement
The two types of digital systems include? Wired ccp and wireless psp
What is the time between exposure to radiation and time the effect becomes visible? Latent period
The collar on a lead apron reduces the dose of radiation to the? Thyroid
Another name for target is? Anode
As an x-ray operator, which of the following procedures will help reduce your x-ray exposure? Standing 6 ft away from the tube head Standing behind a lead lined barrier wall or outside the room Never hold the tubehead during exposure *Answer is All the above
The function of the raised (embossed) dot on the surface of the traditional film is to determine what? Right from left
Radiation units and measurements are measured by? Amount of x-ray energy produced by the x-ray unit Amount absorbed by the body *Answer is all the above
The purpose of this film is to record the entire tooth including 4mm around the apical area? Periapical
The primary purpose for taking bitewing x-rays? To view interproximal surfaces and the crestal bone.
When using the panoramic machine, there is no need to wrap the unit True
The radiographic equipment that can be sterilized is the? Film holders
A radiographic image is produced on a panoramic film by use of? Intensifying screens
Film fogging can best be detected on stored unexposed radiographic film by? Exposing a complete mouth radiograph survey
Time temperature processing means? The developing time is determined by the developer temperature.
What is the ideal time and temperature for manual development? 68 degrees Fahrenheit for 4.5 - 5 minutes
Whether using manual or automatic processing techniques, improper handling can result in? Films sticking together
If a film has debris or dark spots on film, what is the probable cause? Dirty processing rollers
How can you test the effectiveness of the safelight in the darkroom? Using the coin test
Dark room infection control guidelines may include? Barrier placed on counter tops Change gloves or the use of overgloves After all the films are in processor, wash, and dry hands The answer is all the above.
To reduce cross contamination, the most appropriate way to store exposed radiographs prior to processing is? In disposable cups
Created by: itsdarie.l
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards