Save
Upgrade to remove ads
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Lesson 2-1-9

QuestionAnswer
Which of the following types of installations does 1910.269 standard not cover? Locked electrical rooms of an office building
Which of the following topics are not covered by the OSHA 1910.269 standard? Hazard communication
The OSHA 1910.269 standard does not cover which of the following? Construction work
The employer shall determine, through regular supervision and through inspections conducted on at least a(an) ___ basis, that each employee is complying with the safety-related work practices required by this section. Annual
Persons trained in first aid including cardiopulmonary resuscitation(CPR), shall be available when employees are performing work on or associated with exposed lines or equipment energized at or above what voltage? 50
Prior to the start of each job, the employer shall ensure that the employee in charge conducts what with the employees involved? A job briefing
To ensure that the energy control procedure and provisions are being followed the employer shall conduct a periodic inspection of the energy control procedures at least ___? Annually
While work is being performed in an enclosed space, and there is reason to believe that a hazard may exist in the space, or if a hazard exist because of traffic patterns in the area of the opening used for entry, then a person trained in ___ shall be imme First aid
Before and employee enters and enclosed space, the internal atmosphere shall be tested for___ with a direct reading meter or similar instrument, capable of collection and immediate analysis of data samples without the need for offsite evaluation Oxygen deficiency
To determine that body belts, safety straps, lanyards, lifelines, and body harnesses are in safe working condition they shall be inspected ___? Daily
When shall conductive ladders be permitted to be used in specialized hi – voltage work? Where the employer can demonstrate that non-conductive ladders would present a greater hazard.
Live – line tools, rods, tubes, and poles made of fiberglass-reinforced plastic (FRP) shelby designed and constructed to withstand ___ volts per foot for five minutes. 100,000
Only ___ employees may work in areas containing unguarded and uninsulated energized lines, or parts of equipment operating at 50 Volts or more. Qualified
In general, if an employee is to be insulated from energized parts by the use of insulating gloves, ___ shall also be used? Insulating sleeves
The employer shall ensure that each employee who is exposed to the hazards of flames or electric arc's does not wear ___? Clothing made of acetate,nylon,polyester,or rayon
When two or more independent crews will be working on the same lines or equipment, each crew shall ___? Independently comply with the same lock out/tag out and de-energizing procedures.
In general, for the employee to work lines or equipment as de- energized, and lines or equipment shall be de-energized and ___? Properly grounded.
Temporary protective grounds shall be placed at such locations and arranged in such a manner as to prevent each employee from being exposed to ___? hazardous differences in electrical potential
When a ground is to be removed, the grounding device shall be removed from the line or equipment using a live – line tool before the ___? Ground-end connection is removed.
If the equipment operator cannot accurately determine that the minimum approach distance is being maintained, ___ shall observe the approach distance to exposed lines and equipment, and give timely warnings before the minimum approach distance is reached. Designated person
When poles are set, moved, or removed near exposed energized overhead conductors, the poles may not ___? Make contact with the conductor
When a pole is set, moved, or removed near an energized overhead conductor, the employer shall ensure that ___? Employee is protected from accidental contact
To protect employees from falling into holes into which poles are to be placed, the holes shall be attended by employees or ___? Physically guarded.
To minimize the possibility that conductors and cables being installed or removed, make contact with energized powerlines or equipment the employer shall use The Tension stringing method, barriers, or equivalent measures.
If the conductors being installed or removed cross over energized conductors in excess of ___ volts and if the design of the circuit – interrupting devices protecting the lines so permit, the automatic – reclosing feature of these devices shall be mad 600
If two bare conductors are to be spliced, the conductors shall be__? Bonded and grounded before being spliced.
Unless a grip is specifically designed for this application, conductor groups may not be used on ___? Wire rope
Unless the employer can demonstrate a greater hazard,___ shall be used to maintain control of tower sections being raised or position. Tag lines
A ladder or other climbing device shall be used to enter and exit a manhole or subsurface for exceeding ___ feet in depth. 4
While work is being performed in a manhole containing energized electrical equipment, a(an) ___ shall be available on the surface in the immediate vicinity to render emergency assistance. Employee with first aid and CPR training
Unless a cables identity is obvious by reason of distinctive appearance or location, or by other readily apparent means of identification, when multiple cables are present in a work area, the cable to be worked on must be identified by ___? Electrical means
When work is performed on buried cable or on cable in manholes, metallic sheath continuity shall be ___? Maintained or the cable sheath shall be treated as energized.
When draw-out-type Circuit breakers are removed or inserted, they breaker shall be in___? Open position
Conductive fences around substations shall be ___? Grounded
Upon entering and attended substation, each employee other than those regularly working in the station show report his or her presence to the ___, in order to receive information on special system conditions affecting employee safety Employee in charge
Created by: swcurtis
 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards