Busy. Please wait.
or

show password
Forgot Password?

Don't have an account?  Sign up 
or

Username is available taken
show password

why


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
Know
remaining cards
Save
0:01
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
Retries:
restart all cards
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Physics Lab I

Electric Charges

QuestionAnswer
Study electromagnetic force by examining the behavior of non-moving charges and charges in equilibrium. This is called Electrostatics.
Charging by conduction (or direct contact) A charged object is brought into contact with an uncharged one. Charge spreads across both objects, which are then separated.
Polarization A charged object near a neutral object separates + and - charges slightly in neutral object. Thus, the charged object and the oppositely charged near side of the neutral object will be attracted to each other. The neutral object remains neutral overall.
Charging by induction A wire connected to the ground can be used to drain off extra charge from one side of a polarized object, leaving it with a net charge.
As you work through the lab, think about where the charge is going and which of these effects are important
Tool we are using Electroscope with built-in or external deflection scale
Section 5 How to determine charge polarity
UMVPS low-current, high-voltage power supply
Other equipment needed insulated disk; insulated platform; round can; banana cables and alligator clips
Electroscope purpose Hold and measure charge
A greater amount of charge will cause the vane to deflect at a greater degree
Charge will be created using a power supply
Three terminals negative, mid-point, and positive
Power supply pumps charges (either positive or negative)from a large reservoir to a terminal
We will connect one side of the power supply to the electroscope case, which is in contact with the table
Whichever terminal of the power supply is connected to the electoscope case will be neutral, regardless of what the label on the power supply is.
The terminal not connected to the electroscope will be the high voltage (HV) lead.
The HV lead can be either positive or negative.
How many terminals of the power supply is connected to ground in an experiment? Only 1, but which particular terminal is grounded will vary from experiment to experiment
An ideal measuring device will usually have a well defined response curve
If we double the amount of charge on the electroscope, we should expect to see twice the deflection of the movable vane. This would be a linear response (plotting the deflection vs charge would be a straight line).
Purpose of Experiment 4 To determine if your device is lienar and what the minimum deflection you must see is before it becomes linear (and therefore reliable).
Assume that the power supply is linear
A wire coming out of the positive lead is positive relative to the electroscope case
Created by: vahajuddin