Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Pre/Post Trip Inspec
Wheels on the Bus
| Question | Answer |
|---|---|
| What carries air or hydraulic fluid to the wheel brake assembly? | Brake hoses/brake lines |
| Apply _________ and then try to pull forward gently. If it works properly, your vehicle shouldn't move. | The parking break |
| Which of the following dashboard light indicators should you test? | Turn signals |
| What structure supporting the fifth wheel skid plate should be checked for cracks or breaks? | Platform |
| Which external lights should you check? | Tail Lights, break lights, turn signals |
| If the wheel has a sight glass, check that the oil level is adequate. Otherwise, look for leaks around the _________ | Hub oil/axle seals |
| You are looking for puddles on the ground and dripping fluids on the underside of the engine and the transmission. What are you checking for? | Leaks |
| What are the brackets, bolts, or bushings that are used to attach the spring and or air bag to the axle and vehicle frame? | Spring mounts |
| You pump the peddle three times and hold it down for 5 seconds, making sure that the peddle does not move. What are you inspecting? | Hydraulic breaks |
| The angle between the push rod and adjuster arm should be a little over 90 degrees when the breaks are released and not less then 90 degrees when the breaks are applied. This refers to the? | Slack adjusters |
| What releases the 5 wheel locking jaws to that the trailer can be coupled? (You should make sure that it is in the engaged position and the safety latch is in place) | release arm |
| The class A vehicle inspection tests include an engine start, an in dash cab inspection, and an inspection of _____? | The coupling system |
| On which axle must you inspect the break components? | Every axle |
| What carries air or hydraulic fluid to the wheel brake assembly? | brake hoses/lines |
| During your pre trip inspection check the ______ to make sure that its connections are tight and not excessively corroded. | Battery |
| What do you inspect to make sure all are present and free of cracks and distortions and shows no signs of looseness such as rust, trails, or shiny threads? | Lug Nuts |
| What should be clean with no dirt, illegal stickers, obstructions, or damage to the glass? | Windshield and mirrors |
| When you inspect the air lines, which one of the 5 senses should you use to check for air leaks? | Hearing |
| When you pull forward, apply ___ and then check to see if the vehicle does not pull to either side. | The service break |
| When inspecting the drum brake, you should look for all of the following EXCEPT | Leaking fluids |
| To improve visibility during severe or stormy weather, what must be secure, undamaged, and operating smoothly and correctly? | Wipers/Washers |
| Which of the following disengages the engine from the drive train so the vehicle won't move and reduces the load on the starter motor? | Clutch/gear shift |
| What should you check to be sure it is solid, clear of objects,and securely bolted to the tractor frame? | Catwalk |
| If the container is not part of the pressurized system, to check the coolant level, | You can do either of the above (inspect the reservoir sight glass or remove the container cap and check the level visible.) |
| You are making sure that hoses and lines are not cut, chafed , spliced, or worn, and not tangles, pinched, or dragged against tractor parts. What are you inspecting? | Air/Electric Lines |
| As part of your vehicle inspection test, if your vehicle has a cargo lift, you will have to ________ | Check it for leaks and damages, explain the process for checking it for correct operation, check it for any missing parts |
| Which tires should have a minimum tread depth of 4/32 of an inch? | Steering axle tires |
| As part of your vehicle inspection test, if your vehicle has a semitrailer, you will have to check the landing gear and make sure that there is no damage to____. | The support frame |
| What maintains air pressure in the air break system? | Air Compressor/Belt |
| The class B and class C vehicle inspection tests include an inspection of _____. | Special features of the vehicle |
| If your vehicle has ___, check that they are securely mounted and in good condition whether or not they are required by law. | Splash guards |
| Which gauge indicates increasing or normal lubrication pressure to prevent engine failure, seizure or break down? | oil pressure |
| Which gauge indicates the alternator or generator is charging? | Ammeter/Volt meter |
| What transmits power from the transmission to the drive axle? | Drive Shaft |
| What should not be bent, damaged, or rusted through and should be evenly centered with the dual wheels and tires evenly separated? | Spacers |
| Gas or hydraulic devices that cushion the vehicle ride and stabilizes the vehicle and should be secure without leaks are called? | Shock absorbers |
Created by:
Magussell