learncisco-2:You are performing pswd recovery on your 2900 ISR. You have merged the startup config file, changed all the pswds, and enabled all the required interfaces. What else do you need to do in order to complete the pswd recovery process?

T-Copy running config to startup config, T-Change the config register

learncisco-3:The configuration register on your Cisco IOS 2900 series router is set to 0x2101. How will the router choose the IOS image during the boot process?

The first image located in flash will be booted

learncisco-5:Which features are used to extend the lifetime and usefulness of IPv4 networks?

T-Private Addressing;T-VLSM; T-CIDR;T-NAT;

learncisco-8: What is the result of issuing the command "no service password-encryption" on a Cisco IOS router?

F-All current encrypted passwords and future passwords will be stored as plain text in the running configuration;T-All future passwords will be stored as plain text in the running configuration

Help

Options

focusNode

Didn't know it?
click below

Knew it?
click below

Don't Know

Remaining cards (0)

Know

retry

shuffle

restart

0:00

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

Stack #2412383

Question	Answer
learncisco-1:You are setting up a Cisco IOS router as a DHCP server. Which command is used to identify the IPv4 addresses that will be in the DHCP pool?	T-network; F-ip dhcp pool
learncisco-2:You are performing pswd recovery on your 2900 ISR. You have merged the startup config file, changed all the pswds, and enabled all the required interfaces. What else do you need to do in order to complete the pswd recovery process?	T-Copy running config to startup config, T-Change the config register
learncisco-3:The configuration register on your Cisco IOS 2900 series router is set to 0x2101. How will the router choose the IOS image during the boot process?	The first image located in flash will be booted
learncisco-4:Which address and wildcard mask combination will match all IPv4 addresses in the networks 192.168.0.0/24 through 192.168.63.0/24?	192.168.0.0 0.0.63.255
learncisco-5:Which features are used to extend the lifetime and usefulness of IPv4 networks?	T-Private Addressing;T-VLSM; T-CIDR;T-NAT;
learncisco-6:You have the network 172.31.0.0/16 that has been subnetted to /27 networks. What is the block size?	32
learncisco-7:You have the network 192.168.5.0/24 that has been subnetted to /30 networks. What is the subnet ID of the seventh subnet that was created?	192.168.5.24/30
learncisco-8: What is the result of issuing the command "no service password-encryption" on a Cisco IOS router?	F-All current encrypted passwords and future passwords will be stored as plain text in the running configuration;T-All future passwords will be stored as plain text in the running configuration
learncisco-9: What is used to determine the MAC address of a known IPv6 address?	F-ARPv6;T-Neighbor discovery
learncisco-10:Which command is used to disable the active technology package for a license?	license boot module
learncisco-11:Which Cisco IOS command is used to install a permanent license on a router?	license install
learncisco-12:What is the interface portion of an IPv6 address that is using EUI-64 if the interface MAC address is 00A1-6789-ABCD?	02A1:67FF:FE89:ABCD
learncisco-13:Which dynamic routing protocol uses cost as its metric?	OSPF
learncisco-14:Which command is used to set your Cisco IOS device as an authoritative time source that will be used as the trusted time source?	ntp master

Created by: Jbrissette

"Know" box contains:
Time elapsed:
Retries: