Question
click below
click below
Question
Normal Size Small Size show me how
dental material
Question | Answer |
---|---|
how should the tooth surface be prepared for composit | free of all plaque and debris, etched with bonding system |
what factors the cementation procedure? | humidity, temp, and mixing time |
what type of cement is frequently used to cement provisional crowns? | ZOE type 1 |
the provisional restoration should be lined with lutting cement when being placed for temp. coverage. | false |
what cement gives off an exothermic reaction and must be speculated over wide area on a cool, dry, thick glass slab | zinc phosphate |
what would occur if there were a delay between mixing and luting material and placing the indirect restoration | initial set begins |
which item would not be used for placing luting cement | direct provisional restorations |
what factors are not an advantage of using glass ionomer in premeasurd capsules | results may vary |
how should | dental cements be sipensed for mixing |
dispense the powder first | then the liquid |
what type of lass ionomer cement | is designed for restoring areas of erosion near the gingiva |
class 2 | |
properly mixed glass ionomer cement | should have a glossy appearence |
what type of glass ionomer cement is | used to cement orthodontia appliances |
which type of glass ionomer cementis used to cement orthodontic appliances | 1 |
when working with dental cement, which statement is incorrect | requarding minimizing water loss through evaporation |
dispense the liquid first and then powder | |
what step should be followed before dispensing | cement powder |
fluff the powder | measure the powder |
which type of dental cement is used as | an adhesive for permanent indirect restorations |
luting | |
which cement is versitile and the least irritating to the pulp? | glass ionomer and zoe |
which technique will help to dissipate heat when mixing zinc phosphate cement? | mix quickly |
how should polycarboxylate cement appear once setting has initiated | stringy or weblike |
how should cement be placed into an indirect restoration for delivery | add a thin lining to cover all internal walls of the casting |
how shouldl light cured resin tray material be cured? | alkdjfla |
asl;kdfj;l | alskjdf;lakj |
a;lskdjf;lk | LAKSDJF;WIJ |
JDS;LKAKJ;ALKSN | ;LAKSJDF; |
JAJSLDFJAL | AKLSDJFJA;LJ |
A;LKDKV;LAKJ | ALKSDJF;LK |
JJAKLSLDKFJA;LKJ | A;LKSDJF;LA |
DKSLA;DKLSJF;O | WIUQPRO |
AL;SDKJF;L | KSD;LAFJ; |
ALSDFJ;AL | LAKJF;L |
ALSKDJF;LAKJ | AL;DJF;L |
ALDSJ;LFAJO | LKSA;DJF;ALJS |
FA;LSKDJF; | AL;SDJF; |
AKJDF;LA | JA;LDSKJF |
A;LSDKJF | A;LSDJF; |
AL;SKDJF; | LKAJSDF;L |
LDSKJFA;L | ;ALKSDJF; |
AKLSJDF;LAKJ | AJ;SLDKKFJ; |
KAJ;SDFLKJ | AKLDSJF;LAJ |
A;LDJF;LAJ | ALSKJDF;L |
ALKSJDF;L | KAJDS;LFK |
LKJAS;LDFKJ | JA;LSDFJ |
LKAJSD;FLKJ | LKJA;LSKDJF |
A;LSDJF | KJA;LKFJ |
AKLSJDF;LKJ | A;LKSDJF;LJ |
ALSKDJF;A | AKLDSJF |
ALSJDKF | ALSKJF |
DFJA | KASLFH |
;ALSDFKJ | ALKSJDF |
JAL;SDF | LADSFJ |
ALKDFJ | LASKD |
LAJSD | ALDJF |
ASKDF | ;A |
ALSDKJF | LAKJS |
ALDFJ | A;LDSJ |
KALSDJF | ;ALKSDJF |
;LAKKSJDF | AD;SLFKJ |
AKLDFJA;L | ALSDJF |
A;LDSFKJ | A;LSDKJF; |
A;LSDFJ | A;LSDFJ |
AL;DFKJ | AKL;DFJ |
AL;DJF | AL;D |
;ALDK | AKLSJDF |
A;LDKJF | AKSJF |
ALFDJ | ALDKJF |
AKJF | L;AJF |
A;LKDSJF | A;DSLKFJ |
;ALF | ALKDF |
LFJAL | ALFJ |
LADFJ | KLAJF;LJ |
L;AJFD | ;LADKSFJ |
A;LSDKFJ | ;ALFJ |
LASDJF | ;LAJF |
LASDFJ | AL;KFJ |
A;LKDFJ | A;LDJF |
ALDJF | LAKJF |
ALSDJF | ALKSJFKLDSFJ |
A;LKDFJ | ALDKSJF |
ALKSDFJ | A;LSDFJ |
L;ADSJKF | A;LDKFJ |
;LAKF | ALKKDFJ |
ADSKLKJF | ALDKFJ |
alkdsfj | aalkdsfj |
aldkjf | adjfk |
fja;lsdf | afdjkla |
alkdfj | lakdfj |
lakdjf | lkajdf |
lakdjf | lakdfj |
;aldkjaf | lakjdf |
fa;lskdfj | aj;ldskfj |
lkadsjf | alksdfj |
ja;lskdfj | fdlasdkjf |
kasl;dfj | kalsdjf |
kafdj | a;lsdfj |
alkdsjf | akljfd |
lakdjf | alasjf |
alsdjf | aldkfj |
a;ldfj | alkdsjf |
lakjf | a;lkfdj |
al;dfj | la;kjfd |
alkfjd | alksfdj |
Dycal | Base & liner |