Question
click below
click below
Question
Normal Size Small Size show me how
Chapter 9
Chapter 9 Troubleshooting Motors
Question | Answer |
---|---|
A ____ circuit is a circuit in which current takes a shortcut around the normal path of current flow. | Short |
The starting winding of a split-phase motor is removed by a ____ switch as the motor accelerates. | Centrifugal |
A capacitor maybe discharged by placing a 20,000 Sl, 2 W resistor across the terminals for ____ seconds. | 5 |
Before trouble shooting electric motors, the starting mechanism should be locked out and ____. | Tag Out |
An OCPD should be at least ____% of a motor's FLC. | 125 |
When a split-phase motor is turned OFF, a distinct _____ should be heard. | Click |
True/False: Shaded-pole motors that fail are usually replaced. | True |
True/False: A megohmeter may be used to test for insulation breakdown. | True |
True/False: When a capacitor is open, the motor has good starting torque. | False |
True/False: A good capacitor will hold a charge even when power is removed. | True |
True/False: Overloads should be reset before cooling. | False |
True/False: Overheated bearings may cause motor noise. | True |
A ____ circuit is a circuit that no longer provides a path for current flow. A. short B. closed C. open D. full | C Open |
A shaded-pole motor has a ___ starting torque. A. very low B. medium C. very high D. variable | A very low |
A split-phase motor has a ____ winding. A. starting B. running C. Both A and B D. neither A nor B | C Both A and B |
A ____ circuit is a circuit in which current leaves its normal path and travels to the frame of the motor. A. open B. Closed C. grounded D. full | C grounded |
A voltmeter check of a split-phase motor should show voltage within ___% of the motor's listed voltage. A. 2.5 B. 5 C. 7.5 D. 10 | D 10 |
AC capacitors are ____. A. used with capacitor motors B. designed to have no polarity C. both A and B D. neither A nor B | C both A and B |