Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
CMT Basic Safety
Workplace Safety Practices
| Question | Answer |
|---|---|
| The time you spend learning and practicing ____________ can save your life and the lives of others. | safety procedures |
| In construction, keeping your work area clean and free of scraps or spills is referred to as? | housekeeping |
| The federal agency whose mission is to save lives, prevent injuries, and protect the health of Americas workers is the | OSHA - Occupational Safety and Health Administration |
| A ___________ inspection is conducted after an accident that requires hospitalization of three or more workers. | Catastrophe inspection |
| ________________ must be reported to your supervisor | All injuries, accidents, and incidents |
| The four leading causes of death in the construction industry include electrical accidents, struck-by accidents, caught-in accidents or caught between accidents, and____________ | falls |
| The process of hazard recognition, evaluation, and control is the foundation of an effective _________ program | Safety program |
| People should not be able to get past ______barricades | protective barricades |
| _________ are PPE used to prevent falls and protect workers who do fall | Personal fall arrest systems |
| Metal ladders should not be used near | electrical equipment |
| If you lean a straight ladder against the top of a 16ft wall, the base of the ladder should be _______feet from the base of the wall. | 4 ft from the base of the wall |
| On construction sites where there is a break in elevation of 19 inches or more, and no ramp, runway, sloped embankment, or personal hoist is provided, ___________ may be used. | stairways may be used |
| OSHA construction standards require__________ foot-candles of light in stairways | five foot candles |
| The two basic types of scaffolds are | manufactured and rolling scaffolds |
| The most common cause of death for equipment operators is | equipment rollover |
| To reduce the risk of workers being hurt or killed by falling materials, do not stack materials higher than a _________ height to base ratio. | 4:1 height to base ratio |
| A ___________ is a ____________ that is deeper than it is wide, and usually not wider than 15 ft. | A trench is a excavation that is |
| Most cave-ins occur in trenches 5 to _______ ft. deep and happen suddenly with little or no warning. | 5 to 15 feet |
| In every trench over four ft. deep, there must be an exit every__________ | 25 feet |
| Observing proper safety precautions when working with and around electrical current is important because the human body | can conduct electrical current |
| The minimum safe working distance from exposed electrical conductors_____________. | Depends on the voltage |
| What provides the best eye protection | Safety goggles |
| The best shoes to wear on a construction site are ____________ approved. | ANSI - American National Standard Institute |
| A _________ has its own clean air supply | Self contained breathing apparatus |
| HazCom classifies all paint, concrete, and wood dust as _______ material | Hazardous |
| Under HazCom, if you spot a hazard on your job site you must________ | report it to your supervisor |
| Routes of exposure to hazardous material include inhalation, ingestion, and ____________ | absorption |
| Work that is performed near a hazard but not in direct contact with it is called _________ work. | proximity work |
| A confined space | has a limited amount of ventilation |
| ________must be present in the same place at the same time for a fire to occur | Oxygen, heat, and fuel |
Created by:
Jonikag