Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Final Review
Materials
| Question | Answer |
|---|---|
| PHI stands for? | Protected Health Information |
| The most important area of HIPPA to an optician in a dispensary is______? | privacy |
| The two key documents for a direct health care provider are______? | notice of privacy & patient consent form |
| Notice of privacy practices must be______? | given to every patient in writing & displayed prominently in the office |
| A patient consent form is valid only if it is _______? | dated & signed |
| T OR F? Oral communication is subject to the same HIPAA rules as written? | TRUE |
| HIPAA falls under the jurisdiction of_____________? | Department of Human Services |
| T OR F? Dispensaries can mail appointment cards & leave appointment reminders via phone/ voicemail? | TRUE |
| To aid in HIPAA compliance, dispensaries should __________? | keep charts face down & away from unauthorized access, move files to a private area, & ensure the computer records can not be seen by unauthorized individuals. |
| HIPAA compliance forms must be signed by __________? | patients, employees, & vendors |
| What type lens material is hardest & offers the best scratch resistance? | glass |
| What type lens material is the most impact resistant & used for safety? | poly & trivex |
| Which lens types blocks 100% of UV rays? | poly & trivex |
| Out of poly & trivex, which has crisper optics? | trivex |
| Which lens material is half the weight of glass? | CR-39 |
| Which lens material is half the thickness of plastic? | high index 1.67 |
| Who says that we as LDO have to talk to the patient about safety & glass standards? | FDA |
| What's the most common frame material? | monel |
| What tint blocks blue light? | yellow |
| What type glare does AR block? | distractive glare |
| What do we usually apply tot he backside of polarized sunglasses? | AR |
| What blocks 10-12% more light if applied to the front of sunglasses? | mirror coating on the front |
| What is the most common diameter of screw & also drill hole size on totally rimless glasses? | 1.40mm |
| What frame material shrinks slightly when heated? | polyamide |
| What are eyewire closure pliers used for? | to check the fit of the lens |
| What is the primary function of eyewire forming pliers? | to form the frame to the curve of the lens |
| What is the shape of the inner liner inside of semi rimless frame? | figure 8 liner |
| Prism is verified at the _______ on progressive lenses? | PRP 180 degree line |
| A -3.00 lens is decentered 4mm inward toward the pupil. What prismatic effect is induced, & in what direction? | 1.2 prism diopters base out |
| What color is a uniform transmission across the visible spectrum? | light pink |
| What color is used latest electronic devices interfers with sleep cycle? | blue light |
| What colors are seen in their natural state relative to each other? | gray |
| What is the highest transmission of visible light? | green |
| What color absorbs blue light, enhance contrast? | yellow |
| You order a +3.00-2.00*113. It comes back from the lab +3.12-1.87*115. +4.25-4.00*090 +4.12-4.25*093 Using ANSI does it pass/ | NO |
| In reference to the glasses in the previous question, Would you end up sending this pair to your patient in the real world? | YES |
| To use the essilor computer lens you have a recommended minimum B measurement of ___ mm. This makes sure you have at least a ___ mm fitting height from pupil down tot he bottom of the frame. | 15 30 |
| What is the design difference between the essilor computer lens & the Shamir office? | essilor has a distance, intermediate, & near Shamir has intermediate & near only |
| When you order glasses for a special use or frame type & the lab sends you a statement that tells you what the glasses will actually read in the lensometer but it doesn't match the actual RX you ordered, it is considered what type of RX? | compensated RX |
| Where do you verify the power on the essilor office lens? | in the reading area (near) |
| What lens material is the essilor computer lens available in? | POLY |
| Prescribed prism on the essilor computer lenses is verified at the ___ 9mm above the center of the near reference area. | PRP |
| Plano non RX safety glasses are monogramed where? | top center of the lens |
| What math symbol marked on the lens of a pair of safety lets you know they are suitable for high impact use? | + |
| Fresnel prisms are applied to the _____ of the lens with the _____ facing out. | back / rough |
| Considering the order of correct manufacturing, what would be done last to a semi-rimless pair of glasses? | groove |
| What is the recommended minimum edge thickness for a lens to be used in rimless/semi rimless? | 2mm |
| What lens is not recommended for rimless glasses? | CR-39 |
| When drilling, different lens materials require? | different drilling speeds |
| After coming off the edger you must safety bevel ______ of a lens cut as a rimless. | the front & back |
| The drill bit must enter the lens at a ____ degree angle? | 90 |
| The angle of the drill hole & the tilt of the drill depend on the ___ of the lens. | curve |
| WHAT IS "CHAMFERING" IN REGARDS TO DRILLING RIMLESS LENSES? WHY DOES IT NEED TO BE DONE? | It's what is done after drilling holes to help clean them out. |
| What is the recommended maximum edge thickness for drilled rimless lenses? | 5mm |
| What piece of equipment would be used to chamfer? | rat tail file |
| The _____ is where you get the information for drill hole location from the manufacturer. That information is then calculated into the X, Y coordinate system & either typed in or drawn on the lens. | drill map |
| Who sets the rimless drill mount standard? | Vision Council Of America |
| The rimless frame drill mount standards sets the guidelines how long manufacturers must keep _________ & what has to be included. | records / files |
| For dress eyewear we use recommendations from the ____ for our guidelines for processing & inspection of glasses. | ANSI |
| For safety eyewear the recommended standards became law when they were adopted by ____. | OSHA |
| Just having Z87 (older frame) or Z87.1 means that frame is rated for? A. basic impact resistance B. high velocity | A. basic impact resistance |
| Who sets the guidelines for the specified purpose & style combination for sports glasses? | ASTM |
| The purpose of blowing air against both sides of a glass lens after heat treating the lens in a thermal-hardening unit is? | to create stress within the lens & increase impact resistance. |
| T OR F? Because the laboratory takes full responsibility for the accuracy of safety & sports eyewear, verification of lens thickness by the dispenser is not required? | FALSE |
| What is the name of the instrument used to check to see if a glass lens has been heat treated? | colmascope |
| What shape would you see in instrument that would indicate that a lens has been heat treated? | cross |
| The thinnest part of a basic - impact safety lens has to be ____ mm thick? | 3 |
Created by:
Sarah Blackmon