click below
click below
Normal Size Small Size show me how
IT 121 CH1 & CH2a
| Question | Answer |
|---|---|
| T/F A tower case conserves space since it can double as a monitor stand. | False |
| T/F A DVI port transmits a video signal and is also called a DB-15 port. | False |
| T/F An Ethernet port has a connector called an RJ-45 to connect to a network cable | True |
| T/F Functions that used to be provided by expansion cards are more often found as on board ports today. | True |
| Hard drives have three connections for cables: one for reading data, one for writing data, and one for power. | False |
| Which type of port transmits both digital audio and digital video with a single connector? | HDMI |
| Which of the following is an audio port that connects to an external home theater audio system, providing digital audio output? | S/PDIF |
| Which of the following is NOT true of a motherboard? | has a heat sink on the PCIe slots |
| Which of the following is most likely to be installed in a PC, is considered primary storage, and has Windows 7 installed on it? | hard disk drive |
| Which component probably has a dual-voltage selector switch, and has cables that connect to the motherboard and drives? | PSU |
| Which is the most common form factor used today for computer cases, power supplies, and motherboards? | ATX |
| Which power supply connector is the main motherboard power connector on most motherboards today? | 24 pin |
| If you have a PCI Express Version 2 video card, how many pins will the power connector have if the card requires extra power? | 8 |
| Which standard provides the best performance for hard drives? | SATA |
| Which disk drive standard uses an 80-conductor cable? | EIDE |
| Which unit of electricity measures electrical force and 115 is a common value? | Volt |
| Which unit of electricity measures is used to measure the power consumption of a device? | Watt |
| Which type of electrical current is used to transmit electricity to our homes and workplaces? | Alternating |
| Which of the following is true about AC electricity? | It travels from a hot line and returns on a neutral line |
| What type of component holds its charge even after the power is turned off and the device is unplugged? | Capacitor |
| Which of the following is true about an FRU? | A support technician should know how to replace one |
| Which type of fire extinguisher should you have available in the event of an electrical fire? | Class C |
| What is a result of two objects with dissimilar electrical charges touching? | ESD |
| What tool can help discover and report computer errors and conflicts that occur when you first turn on a computer and before the operating system is launched? | POST card |
| Which general-purpose tool can measure characteristics of electricity in a variety of devices? | Multi-meter |
| T/F When disassembling a computer, it's okay to stack circuit boards on top of each other as long as you follow ESD protection rules | False |
| T/F Immediately after you unplug the computer from the power outlet, you're safe to begin working inside the case. | False |
| T/F The motherboard sits on elevated screw holes or spacers to keep it from touching the case. | True |
| T/F A system always needs the 4-pin auxiliary power connector, and sometimes needs the P1 connector as well. | True |
| T/F A board with PCIe slots might have a 4-pin Molex power connector to provide additional power to some types of PCIe boards. | False |
| Which of the following is NOT a good practice when working inside a computer case? | be sure to hold expansion cards by the edge connectors |
| Which of the following is the second step in opening the case of a working computer? | power down the system and unplug it |
| To what should you normally clip the ground bracelet before you work inside the computer case? | the side of the computer case |
| What do you call a connector on a motherboard that consists of pins that stick up from the board? | header |
| Which of the following can be described as round plastic or metal pegs that separate the motherboard from the bottom of the case? | Standoff |
| Which of the following represents the correct order in which you should install components into the case after disassembling a computer? | power supply, drives, motherboard, cards |
| Which of the following is true about installing the motherboard and connecting power? | a 4-pin power cord supplies supplemental power to the processor |
| Which of the following is NOT a typical connector found on the front panel header? | SATA controller |
| Which material is a cooler that sits atop the CPU most likely made of? | Copper |
| What is placed between the bottom of the cooler heat sink and the top of the processor that makes an airtight connection between the fan and processor? | thermal compound |
| Along with the processor, what other device is the highest heat producer in the system? | video card |
| Under what circumstance is a liquid cooling system most likely used? | overclocking |
| If your computer is in a dirty, dusty environment, what tool should you use periodically to prevent overheating? | compressed air |
| What determines the physical size of a power supply and the placement of screw holes? | form factor |
| Which of the following is true about fans in the computer system? | large fans tend to run quieter |
| Which technology may require that you purchase a power supply that specifically supports that technology? | SLI |
| Which of the following is a consideration when purchasing a power supply with the correct wattage? | the power supply should be rated 30% higher than your needs |
| What is the result of using a 3-pin fan connector on a 4-pin header on the motherboard? | the fan speed cannot be controlled |
| What does a small triangle embedded on a connector signify? | the wire nearest the triangle is pin 1 |
| Which of the following is the Intel maximum degree limit for processors? | 185 F |