Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Chapter 15
Electric Filling
| Question | Answer |
|---|---|
| Electric filing training is commonly available | from the industry manufacturer, workshops, and trade shows |
| Most professional nail machines are called: | micromotor machines |
| when using a battery-operated micro motor, you will typically have about _____ of battery usage before you must recharge the unit. | 2 hours |
| Compared to standard micoromotor, handheld micromotors: | have the power source and hand piece combined, are easier to manage, have more pieces. |
| What is the standard shank size for a salon-grade electric file? | 1/32 inch |
| which term refers to a micro motors ability to keep turning when applying pressure during filing? | torque |
| When using a less powerful machine, you will typically: | work at higher speeds and use more pressure |
| Most nail technicians use an electric file with a range of ___RPM. | 5,000 to 20,000 |
| When purchasing an electric file, it is recommended that you use a unit with a hand piece that weighs about: | 4 to 6 ounces |
| Most electric files are table machines that are about: | 4 x 4 x 4 |
| The reverse option on an electric file: | is needed only for left-handed nail techs |
| The life of an electric file depends on: | how often it is used and how it is maintained |
| How much does a standard battery operated micromotor cost? | about 25$ |
| If your hand piece creates excessive vibration, it is recommended that you: | have it serviced immediately |
| Balanced bits that do not wobble or vibrate are referred to as: | concentric bits |
| The standard electric file bits include carbide bits, diamond bits and: | gold bits, natural nail bits and silver bits |
| Diamond bits are made from what type of particles attached to the surface of metal bits? | natural or synthetic diamond particles |
| Carbide bits are measured by: | the number of flutes in each bits |
| Which of the following is not a standard type of carbide bit? | jigsaw |
| Compared to a small barrel bit a large barrel bit | has a larger circumference |
| The grooves carved into a clients nail by filing with bits at the incorrect angle are known as: | rings of fire |
| What shape is a tapered barrel bit? | cone-shaped |
| Cone-shaped bits can be used: | at the cuticle, underneath the nail, on top of the nail |
| The football shaped bit is considered perfect for : | finishing the underside surface of long curved nails |
| The under the nail cleaning bit is: | small and pointed |
| A needle bit can be used: | at the cuticle, for special design work and underneath the nail |
| Maintenance bits are commonly known as: | backfill bits |
| French fill bits are made in which style: | diamond |
Created by:
MsHeather