Help

Options

focusNode

Didn't know it?
click below

Knew it?
click below

Don't Know

Remaining cards (0)

Know

retry

shuffle

restart

0:00

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

cdc v.1

Question	Answer
The Air Force TO numbering system is explained in detail in TO	00-5-18
The First group of characters in Air Force TO number 33D7-10-1 identifies the	equipment's major system
The fourth group of characters in Air Force TO number 1B-1B-2-6 identifies the	section of a secionalized TO
The JG in Air Force TO number 1c-141B-2-9JG-10 indicates the	funcional indicator of the TO
In the Air Force TO system, what lists all TO indexes	0-1-CD-1
In the Air Force TO system, what index TO contains a cross-reference listing of data code numbers assigned to active TCTOs	0-4-2
What type of Air Force TO do you use to locate all of the TOs pertaining to a certain type of equipment?	List of applicable publications
Air Force technical manuals that contain data for the operation and servicing of aircraft equipment are called	other equipment TOs
Publications that contain instructions for use of equipment, in addition to data contained in other manuals, are identified as	supplemental manuals
In the Air Force, COTS technical manuals are normally identified by an	assigned technical order number
What Air Force technical order is not a type of TCTO	Emergency action
What type of TCTO is used to correct conditions that could result in fatal or serious injury?	Immediate
What types of TCTO can be identified by redXs or circled red Xs, respectively, alternately spaced around the border?	Immediate and urgent
The TO that lists all Air Force MPTO is TO	0-1-02
What type of number identifies a preliminary TO?	Sequential copy number.
Where are change pages inserted in existing TOs?	In place of the same number.
The authorized types of TO supplements are	routine,safety, and operational
Which statement best describes TOPS?	TOPS can be issued when the time factor prevents issuing a standard change.
In a Basic TO, how are the pages of an appendix filed?	After the last page of the TO
TO revisions	replace the orginal TO, including all changes and appendices.
What is used to submit recommendations for TO improvements?	AFTO Form 22
The Air Force TO that gives detailed instructions for preparing and submitting an AFTO Form 22 is	00-5-1
The types of TO improvement reports are	emergency,urgent,and routine.
What does the -003 in S/S/SN 34-11-10-003 identify?	SRU ID.
When the fifth element of a S/S/SN is -3, the type of component procedure indicated is	installation.
What does the alpha code in reference designator 3231FC01 identify?	Component type.
An OMMS general system manual provides	fault desciptions and fault isolation procedures.
An OMMS job guide manual includes	functional maintenance procedures.
In the OMMS job guide, what type of procedure is component adjustmen/alignment?	Functional maintenance.
An OMMS fault reporting manual provides	a means of conveying fault information.
In fault code 32-41-001-2, the -001 identifies a faulty	SRU.
Section I of the IPB provides information on use of the codes and designations found in the TO and	a list of related TOs
The introduction to section I of the IPB provides the user the capability of cross-referncing	part numbers and figures.
What column of section II of the IPB contains the letters NAS?	Part number
Section IV of the IPB provides information for cross-referncing	figure,index number, and part number
The data system used to assign and control computer program identification numbers is the	ACPINS.
The ACPINS provides a standardized system that does not	develop software.
What is not a responsibility of CPIN system management office?	Foreign military sales development.
USAF customers must establish CPIN requirements through	TO distribution offices.
Which ACPINS major function is used to deny unauthorized requests?	Distribution.
How many separate components may a CPIN have?	Three.
A CPIN is composed of how many identifier fields?	Four.
In the CPIN identifier, the first field consists of	category and major function codes.
There are how many general types of ACPINS compendiums?	Five
An ACPINS cross-reference compendium contains	quick references for research aids.
The Air Force Instruction that governs the current wing organization and operation is	21-101.
What factor gives Air Force wings, squadrons, and units the capability of fighting from main bases or bare bones forward operating locations at any level of combat?	Decentralization.
Promoting unit self-sufficiency through the effective use of maintenance resources is the responsibility of the	maintenance group commander.
Monitoring and supporting the flight line maintenance effort is the responsibility of the	maintenance operations center.
What is a responsibility of the maintenance operations center?	Notify appropriate agencies of severe weather warnings.
The MXG exists to	create and support the sortie-producing OG.
Whose primary role is it to increase reliability and maintainability of aircraft and support equipment?	QA
The QAP is an assessment system used to	determine aircraft and equipment condition, and personnel proficiency.
What flight in the MXS supports the field assistance support team for calibration?	TMDE
What are AF policy directives?	Orders of the Secretary of the Air Force to initiate, govern, or regulate actions of conduct by AF activities at any level.
What publication contains broad, enduring guidance for preparing and employing AF resources?	AF doctrine documents.
Statements of the Office of the Secretary of the Air Force and HQ USAF used to initiate, govern, or regulate actions are called	AF policy directives.
What documents consist of preocedures that usually contain examples for performing standard tasks?	AF manuals.
Informational publications that include procedures for implementing AF polices are called	pamphlets.
Informational publications that are compilations of systemtically arranged information are called	directories.
Who uses MDC system information for validating manpower requirements?	HQ USAF
Which type of MDC system data is not used at base level?	Analysis of NRTS actions.
What is the primary source of information for equipment configuration status at base, command, and depot levels?	MDC system.
The REMIS is designed to provide information to support AF	equipment maintenance program.
The MDC system data element used to tie together all maintenance actions on specific job is the	JCN
The first five digits of a JCN indicate the	year and Julian date
A work center that contributes labor towards a maintenance requirement is called the	performing work center
What MDC system data element is published in mauals and REMIS tables for each weapon and support system?	WUC.
What form is used for MDC when the IMDS is not available	AFTO Form 349
The number entered in the TAG NUMBER block of an AFTO Form 349 comes from	the AFTO Form 350
Where do you find the code to enter in the TYPE MAINT block of an AFTO Form 349?	In the system WUC manual.
What is entered in column C of an AFTO Form 349 to document a TCTO?	The first five charcters of the TCTO data code or command-assigned data code.
The entry in the CAT LAB block on an AFTO Form 349 indicates the	type of man-hour expenditure.
An X placed in the SCH CODE block of an AFTO Form 349 indicates	the computer must calculate the next calibration or maintenance due date.
Which form provides an interface between on-and off-equipment maintenance documentation, and serves as an identification and status tag?	AFTO Form 350.
What AFTO Form is used as an accountability document for items managed under the DIFM program?	350.
Dates entered on an AFTO Form 350 that pertain to repair cycle times are used	as an aid in determining spares requirements.
What is entered in block 15 of an AFTO Form 350 if an item is not reparable?	The letters NRTS and the not reparable this station code.
Who can give authorization for an aircraft to be flown while under a red X condition?	No One
The symbol you enter on inspection forms when an urgent-action TCTO is received is a	red diagonal.
The IMDS is a	base-level computer system used for maintenance management
Correcting erroneous data in the IMDS is a function of	database management.
The IMDS is event oriented and user friendly, which means it	checks keyboard entries for compatibility.
The primary purpose of the IMDS screen 380 is to	provide an up-to-date list of all open JCN.
What IMDS screen displays a maintenance snapshot inquiry?	122.
What is no a function of the GO81 Automated Maintenance Informtion System?	Personnel leave scheduling.
Of the four types of programs used in the GO81 Automated Maintenance Information System, which is consdered to be the "heart" of the system?	Data input.
Users of the GO81 Automated Maintenance Information System know they are logged out when they see on the computer screen word	Mobility.
Supply discipline is best described as	extra consideration to get the most from available resources.
Who is accountable for the equipment items?	Supply personnel and equipment custodians.
What supply printout provides the user a list of all parts ordered, but not received?	Due-out validation listing.
What type of property responsibility requires that directives and instructions be issued?	Command.
What type of property responsibility is applicable when a sergeant takes possession of a box that fell off an AF supply truck?	Custodial.
One way you can be relieved of property responsibility is to	turn the property in to supply.
When a person responsible for property is transferred, and the propert remains with the organization, property responsibility	stays in the organization.
Unit nonexpendable equipment authorizations are based on	unit mission and number of personnel authorized.
The on-hand quantity of bench stock items does not normally exceed	60 days.
Material deficiency reporting procedures are found in Air Force TO	00-35D-54
The orginator sends a draft DR for screening to	the screening point.
What type of DR requires submission by message within three workdays after the discovery of the deficiency?	Category II.

Created by: Siroric

"Know" box contains:
Time elapsed:
Retries: