Band Saw Safety Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
OFF | Make all adjustments to the band saw while the machine is turned ___ and the blade is at a complete stop. |
½ | The upper blade guide and guard should be adjusted so they are about __ inch above the stock. |
FULL | Allow the blade to reach ____ speed before starting the cut. |
FAST | Feed the stock at a steady rate but only as ____ as the blade will take the stock. |
LINE | Keep your fingers at least 2 inches away from the blade while cutting and never allow your hand of fingers to follow the ____ of the cut. |
RELIEF | Plan ahead for curve cuts. Tight curves require a series of ______ cuts that will release the waste and prevent the blade from binding. |
SNAP OR BREAK | A regular clicking noise indicates a crack in the blade which may ____ __ _____. Stop the machine and ask the instructor to change the blade. |
OFF | If the blade breaks in the middle of a cut, step away from the machine and turn it ___ providing that you can do so safely. |
STOP | When backing out of a cut for more than one inch, ____ the machine and back out carefully following the original path of the cut. |
V_SHAPED | Round stock may require the use of a _______ jig to support it and prevent rotation of thestock during the cut. |
Created by:
Room224
Popular Miscellaneous sets