Busy. Please wait.

Forgot Password?

Don't have an account?  Sign up 

show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.

By signing up, I agree to StudyStack's Terms of Service and Privacy Policy.

Already a StudyStack user? Log In

Reset Password
Enter the email address associated with your account, and we'll email you a link to reset your password.

Remove ads
Don't know (0)
Know (0)
remaining cards (0)
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Band Saw Safety

OFF Make all adjustments to the band saw while the machine is turned ___ and the blade is at a complete stop.
½ The upper blade guide and guard should be adjusted so they are about __ inch above the stock.
FULL Allow the blade to reach ____ speed before starting the cut.
FAST Feed the stock at a steady rate but only as ____ as the blade will take the stock.
LINE Keep your fingers at least 2 inches away from the blade while cutting and never allow your hand of fingers to follow the ____ of the cut.
RELIEF Plan ahead for curve cuts. Tight curves require a series of ______ cuts that will release the waste and prevent the blade from binding.
SNAP OR BREAK A regular clicking noise indicates a crack in the blade which may ____ __ _____. Stop the machine and ask the instructor to change the blade.
OFF If the blade breaks in the middle of a cut, step away from the machine and turn it ___ providing that you can do so safely.
STOP When backing out of a cut for more than one inch, ____ the machine and back out carefully following the original path of the cut.
V_SHAPED Round stock may require the use of a _______ jig to support it and prevent rotation of thestock during the cut.
Created by: Room224