INTENSIFYING SCREENS Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
What % of the x-rays incident on the radiographic film interact with the film | Less than 1% |
Use of screens results in a _____ radiation dose to the patient but there may be a slight _______ to the film | lower/ blur |
Visible light interacts with the film to form | latent image |
Any material that emits light in response to some outside stimulus | luminescent material or a phosphor |
2 types of luminescence | 1. Fluorescence 2. Phosphorescence |
Radiographic intensifying screens convert x-ray energy to | visible light |
visible light is emitted only when stimulated | Fluorescence |
the phosphor continues to emit light after stimulated | Phosphorescence |
the phosphor continues to emit light after stimulated | screen lag or after glow |
relative number used to identify the efficiency of conversion of x-rays to visible light | Screen speed |
emits light during stimulation | phosphor |
phosphor used before 1980 | calcium tungstate |
rare earth phosphors | gadolinium, lanthanum, and yttrium |
Can produce more light with less exposure | Rare earth screens |
faster than calcium tungstate screens | Rare earth screens |
reflects the light that is going in the opposite direction and directs it to the film | reflective layer |
This is the thickest layer | base |
This layer is primarily for mechanical support | base |
Light photons are produced | isotropically |
amaount of photons are emitted in the direction of the film | Less than 1/2 |
the speed of the screens are influenced by | The thickness of the phosphor layer and the size of the crystals |
This layer helps to resist abrasion and damage | Protective coating |
This layer also helps to decrease static electricity on the screen | Protective coating |
layer that is closest to the film | Protective coating |
what are the layers of the screen | 1. Protective coating 2. Phosphor 3. Reflective layer 4. Base |
Two reasons to limit the size of the x-ray field: | to decrease unnecessary exposure and Decrease scatter radiation so that image contrast improves |
X-rays that enter the image receptor | image forming x-rays |
X-rays that exit the patient | remnant x-rays |
The simplest beam restricting device | Aperture diaphragms |
positive beam limiting devices | Automatic collimators |
the most common beam limiting devices for radiography | Variable aperture collimators |
Has a white light and mirror to show the field and the central ray | Collimators |
These are metal structures that extend from the x-ray tube and restrict the useful beam to the required size | Cones and cylinders |
Consists of 2 sets of adjustable lead shutters that provided a rectangular or square field | Collimators |
used to decrease the patient dose | Screens |
the way to determine how efficient the screens are at reducing the dose | The intensification factor |
IF = | Exposure without a screen / Exposure with a screen |
refers to how small an object can be to be identified on an image | Spatial resolution |
refers to the ability to distinguish between and image tissues of similar density | Contrast resolution |
Speckled background and is seen with fast screens | Image Noise |
Quantum mottle | Image Noise |
Screen speed categories | Par, High speed, Fine detail |
rare earth – 50 to 80 speed | Fine detail |
High spatial resolution | Fine detail |
rare earth – up to 1200 speed | High speed |
Most use from 400-600 | High speed |
Calcium tungstate – 100 speed | Par |
% of the x-rays striking the radiographic screens interact with the screen | 30 |
involves the outer shell electrons | Luminescence |
Created by:
hakrrins
Popular Radiology sets