click below
click below
Normal Size Small Size show me how
Solid Edge Cert. SG
A study guide for the Solid Edge certification exam. (CATA)
Question | Answer |
---|---|
What functions can be performed by the Steering Wheel? | It can revolve, rotate, and extrude. |
A tool that shows relationships between elements? | Itellisketch. |
Which tab is Part Painter found in? | The "view" tab. |
While sketching, what should you press (two keys) to get oriented normal to the sketch plane? | Ctrl + H. |
What is used to search and find commands? | Command Finder. |
(Y/N) Will deleting the original sketch of a 3D model result in the 3D model being deleted? | No. |
(Y/N) Can all "Draw" commands be found in the Home tab? | No. |
What are the solid edge environments? | Draft, part, assembly, and sheet metal files are all Solid Edge environments. |
What is a unit system that is NOT included with Solid Edge? | ISO inch. |
What command/operation can be used to intersect two lines in a sketch? | The "Trim Corner" command. |
What 2D constraint can be used to align two linear elements? | Collinear. |
In synchronous mode, what is the first step in creating a sketch? | Selecting a command from the "draw" group. |
What are the three ways you can lock to a sketch plane? | Moving the cursor over a plane and pressing F3 Right-clicking an already present sketch in the Pathfinder and pressing "Lock Sketch Plane" Moving the cursor over a plane and selecting the lock icon. |
(Y/N) Is "angle" a face relationship? | No. |
When attempting to get the area of a sketch, why will the "area" command be grayed out? | It is grayed out due to the user not being locked on the sketch plane. |
What command is used to remove a sharp edge in a part model? | The "Chamfer" command. |
What command is "split" command under? | The "Extend to Next" command. |
What are all the modes of the selection tool? | Remove, add/remove, add, and normal. |
Which group is the "box" command found? | The "solids" group. |
(Y/N) When attempting to restore a sketch, is the command ribbon used? | No. |
(Y/N) When modifying a 3D part, will the original sketch be changed to match? | No. |
Locked dimensions can be changed by the ___ and not by the ___. | User, Model. |
What keyboard shortcut is toggled to add/cut material during extrusions? | Spacebar. |
How do you get to the radial menu? | Holding down the right mouse button. |
What dimension style created dimensions from the same point and a further one, usually creating a stack-like view? | The "Stacked dimensions" style. |
(Y/N) Does the view cube and the "Sketch View" button do the same thing? | No. |
(Y/N) Is the radial menu fully customizable to the users wanted commands? | Yes |
What is the button with the Solid Edge icon called? | The "Application" Button |
(Y/N) When 2D dimensions are locked, are they until extruded to a 3D part? | No. |
When dimensions migrate to model edges, what 3D PMI do they become? | Dimensions. |
What order is the best to start a part? | Selecting a draw command, locking to a plane, selecting "sketch view", and drawing a sketch. |
What tab is the "area" command found under? | The "Inspect" tab. |
What option is NOT under the "Round" command? | Single. |
What group is the "Thinwall" command found in? | The "Solids" group. |
What dimension style includes dimensions that go from a starting and ending point and resembles a chain-like style? | The "Chain Dimensions" style. |
(Y/N) Is the check box for "Base Reference Planes" found in the Feature Tree? | No. |
(Y/N) Can you use constructions lines to set dimensions to geometry? | Yes. |
What dimensions can be driven/changed by other dimensions? | Blue/Unlocked dimensions. |
Under what command does the command to draw a hexagon lie? | The "Rectangle" command. |
What command allows you to choose faces, geometry, and more on an internal plane? | The "Quick Pick" command. |
What is "Design Intent"? | How Solid Edge thinks you are going to make a part. |
What should you do if you do not know where a command is? | Use the command finder. |
What should you do to view all the relationship markers on a sketch? | Turn on the "Relationship Handles" option. |
What are all the ways you can delete an extra sketched line? | Selecting (Right-Click) the line and pressing "Delete". Using the undo button. Using the "Trim" command. |
What is the best way to measure angles in a triangle? | Using the "Angle Between" command. |
What does it mean to see a "Non-Manifold" error? | It means that a part is non-manufactureable. |
(Y/N) Does Zero-thickness and Non-manifold mean the same thing? | Yes. |
What type of plane is needed to place text along a curved plane? | A "tangent" plane. |
While placing text along a curse, what axis will the text follow? | The X axis. |
Where is the "Wrap to Sketch" command found? | Under the "Surfacing" tab. |
What command is used to projects features of a part onto a sketch plane? | The "Project to Sketch" command. |
Which tab contains the ability to change the background image? | The "View" tab. |
What options are available when creating a pattern? | Circular, rectangular, along curve, and pattern by table are all options when creating a pattern. |
When using the "loft" command, what is NOT an option? | "Circular" is not a valid option. |
When making a sketch that includes offsetting a line and such, what command is the most efficient at doing so? | The "Offset" command. |
A plane that created by clicking on a face of a part is called? (Adjacent/on the face of the part) | A "coincident" plane. |
A plane that is created on a curve is called? (Intersects the part and is on a curve) | A "normal to curve" plane. |
A plane that is adjacent or tangent to a curve is called? (Tangent and on a curve) | A "tangent" plane. |
A plane that is created using three points is called? | A "plane by three points" plane. |
What commands can be used to create a diamond-like shape? | The "Polygon by center" and "Draft" commands. |
What command can be used to detach features from a part? | The "Detach" command. |