click below
click below
Normal Size Small Size show me how
Planer Safety
Question | Answer |
---|---|
12 | The minimum length of material what will run safely through the planer is ___ inches. |
1/32 | The recommended depth of cut you should take is ___ inch. |
SIDE OF PLANER | When feeding stock into the planer, stand to one________________, rather than directly behind the material. |
RUNNING | Do not look directly into the throat or opening of the machine while it is _________. |
LARGEST | When planing pieces of wood that vary in thickness, always plane the _________ pieces first, and work down to the small pieces. |
GRAIN | Do not plane cross-grain, as this may cause pieces to come apart. Only plane along or with the direction of the _______. |
PERSON | Extra long stock must be supported on both sides of the planer while it runs so you must ask for the assistance of another ________. |
STOP | If the stock jams while being planed, _____ the machine completely and lower the table to free the jammed material. |