Busy. Please wait.

Log in with Clever

or

Don't have an account? Sign up

Sign up using Clever

or

taken

Age:

12 or younger
13 or older

Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password

Enter the email address associated with your account, and we'll email you a link to reset your password.

Upgrade to remove ads

N+ Word Scramble

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

Created by: baumsquad

Question	Answer
1. VLANs break up _________ domains in a Layer 2 switched network.	1. broadcast
2. Switches, by default, only break up __________ domains.	2. collision
3. what does trunking provide?	3. Trunking allows you to send info about many or all VLANs through the same link. access ports allow information about only one VLAN transmitted.
4. you need to power a device such as an access point or IP phone. what protocol can provide power to these devices over an Ethernet cable?	4. Power over Ethernet (PoE)
5. you plug a host into a switch port an the host receives an IP address but the user can't get to the services it needs. What is probably the problem?	5. The VLAN port membership is set wrong.
6. if a destination MAC address is not in the forward/filter table, what will the switch do with the frame?	6. Flood the frame out all ports except the port on which it was received.
7. what are the 3 switch functions at Layer 2?	7. address learning, filtering, and loop avoidance
8. if a frame is received on a switch port and the source MAC address is not in the forward/filter table, what will the switch do?	8. it will add the source MAC address to the forward/filter table.
9. what is used at Layer 2 to prevent switching loops?	9. Spanning Tree Protocol (STP)
10. you need to implement a separate network for contractors and guests working at your office. which technology should you implement?	10. Create a VLAN for contractors and another VLAN for guests.