Oil Furnace Word Scramble

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

Question	Answer
What are three products of combustion?	1) Heat 2)Water Vapor 3) Co2
Two types of oil burners pumps	single and dual stage
Three functions of the oil burner nozzle	1) Atomizing 2) Metering 3) patterning
3 storage tank design	indoor, outdoor, and underground
which is storage tank design?	indoor, easy access to test.
how do you test water fuel tank?	wax on the stick
Bypass plug product remove	one stage
Fuel line not required	PVC or cast iron fittings
Process of fuel combustion	atomization
one pound fuel oil	3
One gallon fuel produce how many btu	140,000 btu
How much excess air?	50%
Fuel oil pump rotary pump?	false, gear driven design.
First stage	pull from tank for long distance.
Second Stage	push to nozzle into burner
List six of the main components of a fuel oil burner	1)End Cone 2) Air tube 3) fuel pump 4) Blowing housing 5) Blower wheel 6) Nozzle
how does end cone on retention burner better combustion ?	Squirrel, increase volume
Three type of combustion heat, water, and vapor	False
Most burner motors are	PSC
burner motor connect to fuel pump	flexible coupling
The burner fan is	squirrel cage
Three functions of nozzle	1) atomize 2) metering 3)patterning
Two information stamp of nozzle	1) orifice size 2) spray angle
Why spray pattern is important?	Design of the burner box
Spray angle	30 to 90 degree
Nozzle can be use as file by metal brush.	false, replace it.
Name the three spray patterns	1) Hollow 2) semi-Hollow 3) solid
Which type spray burner use larger burner?	Solid
Air blowing combustion chamber burner through	Air tube
Metal rode insulate ceramic insulate would identify	electrode
What determine the shape combustion chamber?	Nozzle spray angle
Four Primary control functions:	1) Safety function 2) shutdown burner 3) ignition process 4) Start and stop blow motor
What are two types of primary control?	1) Stack switch 2) cad cell switch
Primary control that use hot and cold contact	stack switch
Cad cell be able shutdown burner if flame is not present	False
The typical resistant cad cell sense light	600 to 1000 ohms
STI-P3 stands for	Steel Tank Institute-Protected 3 ways
What are four characteristics of forced-air furnace?	1) low-boy 2)upflow 3)downflow 4)horizontal
Fuel oil compose of	1) hydrogen 2) carbon
If the oil tank is located above the oil burner	One-pipe system
Oil storage tank is located below the oil burner	Two-pipe system
Oil lines should be:	3/8" OD copper lines, made of copper, steel, or brass. Never use PVC nor Cast-iron, flare connection
Oil deaerator	Oil pipe component that allows a one-pipe system to function as a two-pipe system
Ash content definition:	The amount of combustible materials contained in the fuel oil
Distillation quality definition:	The ability of the oil to be vaporized.
Pour Point definition:	The lowest temperature at which the fuel can be stored
Carbon Residue definition:	The amount of carbon left in a sample of oil after it is changed from a liquid to a vapor by being boiled in an oxygen-free
Viscosity definition:	The thickness of the oil under normal temperature
Ignition Point definition:	A few degree higher than the flash point
Flash Point definition:	The lowest temperature at which vapors in the air above the fuel oil ignite for a short period of time when exposed to flame

Created by: toolegit