board prep Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Term | Definition |
| heat units (HU) | used by the anode cooling chart to tell the time needed for the anode to cool completely in order to continue making exposures |
| HU formula | kVp (anode speed) x mA x s (technique) x rectification constant (generator factor) |
| generator factor to caculate HU | single phase: 1 three phase 6 pulse: 1.35 3 phase 12/14 pulse: 1.41 high frequency: 1.41 |
| total pixels in a matrix formula | rows x columns |
| pixel size formula | FOV/matrix |
| bit depth determines: | contrast resolution |
| bit depth formula (number of shades) | 2n^2 |
| magnification factor (MF) | Full-size input phosphor diameter / Selected input phosphor diameter |
| What circumstances are most likely to lead to an increase in grid cutoff when using a parallel grid Inc in the exposure time Improper positioning of the grid Large SID Use of sm digital display devices Use of large-area image receptors | improper positioning of the grid, use of large image receptors |
| How much voltage ripple is produced by three-phase, twelve-pulse power 100.0% 4.0% 0.9% 14.0% | 4.0 % |
| Select the factors that influence the amount of beam attenuation. tissue density tissue thickness x-ray beam quality atomic number x-ray beam quantity | tissue density, tissue thickness, xray beam quality, atomic number |
| If the source to image distance is 150 cm, how much variance between the light field and the x-ray beam is acceptable 6 cm from the IR 15 cm from the IR 3 cm from the IR | 3cm, 2% variance |
| A radiograph is made using 40 milliampere seconds (mAs) at a 40-inch SID. If the image must be repeated at a 72-inch SID, what mAs value is necessary to maintain the same exposure Incorrect answer: 120 mAs Correct Answer: 130 mAs 12 mAs | |
| What factors influence receptor exposure Correct answer: SID Incorrect answer: kVp Missed Option - Incorrect Correct answer: Grid Ratio Correct answer: mAs | |
| From the following, select the factor(s) that mAs affect in digital imaging Correct answer: patient dose Incorrect answer: contrast Selected Answer - Incorrect Incorrect answer: spatial resolution Selected Answer - Incorrect Correct | |
| What are the functions of the anode Incorrect answer: Reducing off-focus radiation Selected Answer - Incorrect Answer, Reducing the intensity of leakage radiation Answer, Protecting the x-ray tube from damage Incorrect answer: Pro | |
| Which factors influence image contrast Incorrect answer: IR Missed Option - Incorrect Correct answer: OID Answer, SID Incorrect answer: Alignment of the anatomical part Selected Answer - Incorrect Answer, FSS | |
| The feature of the image intensifier that automatically adjusts kVp and mAs during fluoroscopy is the: automatic gain control. , Not Selected photocathode. , Not Selected electron-focusing lens. , Not Selected Incorrect answer: aut | |
| If a 30/23/15 cm image intensifier is operated in the 23-cm mode, the fluoroscopic image will be magnified by a factor of 1.5 , Not Selected Incorrect answer: 1.3 Correct Answer: 2 1.7 , Not Selected 2 | |
| hen using automatic exposure control (AEC), the radiologic technologist can still select or change which factors Correct answer: Optical Density Correct answer: kVp Correct answer: Backup time Incorrect answer: mA Missed Option | |
| The measure of the imaging system’s ability to display the contrast of anatomic objects varying in size is the: Incorrect answer: spatial frequency. Correct Answer: modulation transfer function. modulation transfer function. , Not Select | |
| If the source to image distance is 150 cm, how much variance between the light field and the x-ray beam is acceptable Higher; larger , Not Selected Incorrect answer: Lower; smaller Correct Answer: Higher; smaller Higher; smaller , | |
| Photoelectric interactions result in the production of Incorrect answer: Secondary photon Missed Option - Incorrect Correct answer: Photoelectron Answer, Compton electron Correct answer: Characteristic radiation | |
| voltage ripple | Voltage ripple is the variation in the output voltage waveform of an X-ray generator. It's expressed as a percentage, calculated as (Vmax - Vmin) / Vmax * 100%, where Vmax is the maximum voltage and Vmin is the minimum voltage during a cycle |
| how voltage ripple affects xrays | affects the energy and intensity of the X-ray beam. Lower voltage values during the cycle produce lower energy X-rays, some of which may be absorbed by the patient or have little diagnostic value |
| Single-phase: | These generators have the highest ripple (100%), as their output voltage fluctuates between the peak voltage and zero |
| Three-phase | Three-phase generators (6-pulse and 12-pulse) have lower ripple (around 13% and 4%, respectively) due to their smoother waveform |
| High-frequency generators | These generators use inverters to produce a nearly constant DC waveform, minimizing ripple to less than 1% |
| half/full wave(rectified) ripple | 100% ripple |
| three phase six pulse ripple | 14% |
| three phase twelve pulse | 4% |
| high frequency | <1% |
| When performing a quality control test to ensure that the penetrating ability of the x-ray beam is accurate, the result must be within this amount of the control panel setting: 5% 4% 2% 10% | 5% |
| exposure indicator | The numerical value that is displayed on the processed image to indicate the level of x-ray exposure received on the digital image receptor |
| sampling frequency. | How often the analog signal is digitized |
| A grid has lead strips 3 mm high and 0.5 mm apart. What is the grid ratio | 6:1 |
Created by:
taetay5831