Structure CH13 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| What is tactical ventilation | The planned, systematic, and coordinated removal of heated air, smoke, gases, or other airborne contaminants from a structure |
| When should tactical ventilation be performed | Fire attack hoselines/teams are in place and ready to advance toward the fire |
| What must occur for a successful tactical ventilation | Careful planning Knowledge of building construction Knowledge of fire behavior Systematic application of procedures/techniques Coordination with other fire ground activities |
| What are some reasons tactical ventilation would be performed | Reduce interior heat Decrease rate of fire spread/extreme fire behavior Improve visibility, efficiency, victim survival potential Reduce smoke damage and property damage |
| How can tactical ventilation improve life safety for firefighters and occupants | Increase oxygen concentration Reduce toxic products of combustion concentration Reduce temperature Increase visibility Create smoke free egress paths |
| What factors should be considered when assessing the use of tactical ventilation | Risks to occupants/firefighters Building construction Fire behavior indicators Location/extent of fire Type/location of ventilation Weather Exposures Staffing/available resources |
| What hazards can be expected from the accumulation of smoke and fire gases | Visual impairment Lack of oxygen Presence of toxic gases Presence of flammable gases Possibility of rapid fire development |
| What building characteristics should be considered when assessing the use of tactical ventilation | Occupancy type Construction type Floor area and compartmentation Ceiling heaight Number of stories above/below fire floor Number, size, and location of exterior openings |
| What observations of smoke can create a clear picture of interior fire conditions | Volume of smoke Location of smoke Smoke color, density, and pressure Movement of smoke |
| What are air flow indicators the you should pay attention to when using tactical ventilation | Velocity Turbulence Direction Movement of neutral plane |
| What is air flow caused by | Pressure differentials inside/outside a compartment Differences in density between hot smoke and cool air |
| What must be present in order for a flow path to be present | Vent inlet Vent outlet |
| What is a flow path | The path air travels between the inlet and outlet vents |
| What are some visual indicators to watch for from heat | Blistering paint Bubbling roofing tar Crazed glass |
| What can flames provide an indication of | Size and location of the fire |
| What are the different types of ventilation | Vertical and horizontal |
| What are the available means of ventilation | Natural, mechanical, and hydraulic |
| What are some factors that effect where to ventilate | Location of occupants and fire Desired flow path Condition of building, building construction, openings Effect ventilation could have on fire, egress, exposures |
| What factor should the means of tactical ventilation work with | Prevailing wind |
| What are some internal exposures | Occupants Contents Uninvolved rooms/area of building |
| What risk does ventilation below the highest point of a building increase | Ignite portions of the exterior building Heat/gases drawn into openings Ignite exposures |
| What are some things that external exposures can be affected by | Radiation Direct flame contact Heat/smoke drawn in through openings/HVAC Ignition from convection embers |
| What indicates the need to used mechanical or hydraulic ventilation | Location/size of fire have been determined Layout of building won’t work with natural ventilation Natural ventilation becomes ineffective Fire burning below ground Fire so large natural ventilation isn’t efficient |
| What structure work well with horizontal ventilation | Buildings that fire has not involved attic/cockloft Involved floors of multistory structures are below top floor Building is weak and threat of collapse |
| Where should a fan be positioned for mechanical horizontal ventilation | At an opening on the leeward side |
| What should be done when using a smoke ejector | Sealed the area around the opening to prevent recirculating |
| What can atmospheric pressure cause when using horizontal ventilation | Recirculate air by pushing smoke and heat back into openings |
| What is a best practice for having effective horizontal ventilation | Keep the flow path as straight as possible |
| How far away should a fan be positioned from a door for PPV | 4 to 6 feet |
| For PPV what area of the opening being used should be covered by the fan cone | All of it |
| Where should positive pressure be applied when ventilating a multi story building | Apply at the lowest point |
| What is the main issues with PPV In above ground operations | Coordinating the opening and closing of the doors in the stairwell being used to ventilate the building |
| What actions should be taken to ensure PPV is successful | Exhaust opening is sufficient Monitor PPV fan Maintain communications Take advantage of existing openings Cover inlet vent with air cone Avoid creating unintended outlets |
| What are some advantages of PPV to NPV | Don’t have to enter IDLH More efficient Little effect on smoldering debris Less cleaning/maintenance PPV effective in all types of structures Heat and smoke can be directed |
| What are some disadvantages of PPV | Structure must be intact Carbon monoxide levels may be increased Hidden fires can accelerate |
| How is hydraulic ventilation performed | Fog nozzle directed out an opening and covering 85-90 percent of the opening and the nozzle should be at least 2 feet away from opening |
| What are some disadvantages of hydraulic ventilation | Increase in water damage Excessive use of water Increase in ice in freezing temperatures Firefighters must remain in IDLH Operations interrupted when air supply low |
| What are some advantages of using mechanical ventilation | Supplements and enhances natural ventilation Ensures more control of air flow Speeds the removal of contaminants Reduces smoke damage Promotes good public relations |
| What can occur if improper mechanical advantage occurs | Fire intensifies Has to have a power source Special equipment needed Need additional resources/personnel |
| When will vertical ventilation occur | When ic determines the need, safety, and effectiveness Considered age/type of building construction Observed safety precautions Identified escape routes Selected pace to ventilate Considered location, duration, and extent of fire |
| What risks are increased when vertical ventilation occurs | Placing personnel above ground level Working on both peaked and flat surfaces Working above fire Working on roofs that could have been weakened |
| How should roofs with tile and slate be sounded | They can’t |
| What are some signs of an unsafe Roof | Melting asphalt Spongy roof Smoke coming from roof Fire coming from roof |
| What should happen before cutting a ventilation hole | Cut a inspection hole |
| What are the primary types of inspection holes | Kerf cut and triangle/A cut |
| What is offensive ventilation | Making an opening over the seat of the fire at or near the highest point of the roof |
| What are two critical points to remember when ventilating any roof | Square/rectangular opening is easier to cut One large opening is better than multiple small ones |
| Where should flat roof openings be located | Between roof trusses or with the truss in the middle of the opening |
| What cut is used when a truss is in the middle of an opening | Louver cut |
| Where should a ventilation opening be made on shingle covered pitched roofs | A few inches below the peak on the leeward side |
| How are slate and tile roofs be ventilated | Remove tiles/slate and cut sub roof under it as a standard roof |
| What should be done whenever ventilating an arched roof | Make a kerf cut to locate arches, observe truss space, determine fire involvement |
| Where should you walk whenever ventilating a roof | On trusses or strong points |
| What a trench cut strictly used for | Defensive operation/ventilation |
| What does a trench cut create | A firebreak that stops the spread of fire in common attics or large structures |
| Where should a trench cut be located | 30 feet ahead of the advancing fire |
| What should happen before a trench cut occurs | An offensive ventilation opening is made |
| What does the offensive ventilation opening allow when making a trench cut | Heat and smoke escape allowing the trench cut to be made safely |
| What would happen if an offensive ventilation opening was not made before a trench cut is performed | Fire will quickly be drawn to new opening Fire will burn past trench cut Endanger firefighters |
| How is a trench cut made | Two parellel cuts far enough apart to stop the fire but it compromise roof integrity that extends from one exterior wall to the opposite exterior wall. |
| What are some factors that reduce the effectiveness of vertical ventilation | Improper use of mechanical ventilation Indiscriminant window breaking Fire stream directed into exhaust openings Explosions Burn through of structural components Improper location of ventilation openings |
| How do you ventilate a basement with windows | Horizontal ventilation |
| What is the best practice to ventilate a basement without windows | Vertical ventilation using natural flow paths from the basement |
| What is a last resort to ventilate a basement | Cut an opening in the floor near a ground level opening and use fans to push heat and smoke out of the building |
| How are windowless buildings usually ventilated | Mechanical ventilation |
| When can horizontal smoke spread and hot gas layers occur in multi story buildings | Vertical exhaust opening isn’t large enough to exhaust smoke and gases |
| What stair well can be used to ventilate a multistory building | The stair well that penetrates the roof |
| How can a stairwell be used to ventilate a building | Chimney with the roof door open and a PPV fan located at the base of the stair well. |
Created by:
Kab731