AR: Robotics Parts Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Vex Part | Vex Part Description |
| axle | placed through the rotational center of an object (like a gear or wheel) |
| bearing flat | An axle is passed through the center hole which allows it to spin freely. |
| pop-rivet | A plastic fastener system consisting of two parts and used to hold the VEX bearing flat bearing in place on the structure system. |
| caster wheel | A free-swiveling wheel mounted on a robot to provide stability while producing a minimum of friction. |
| bumper switch | A high-durability sensor designed to detect physical contact. This is a digital sensor. |
| c-channel | A structure system beam used to form the "skeleton" of the robot. |
| chain and sprocket | Optional parts to provide a chain drive in the motion system of the robot. |
| collar | A type of spacer that can be set to remain stationary at any given point along an axle. |
| gear | Spinning discs with teeth that prevent them from slipping past each other; frequently used to transfer rotational motion from one piece to another, and to provide mechanical advantage while doing so. |
| gusset | A piece used to strengthen an angled joint. |
| chassis rail | A structure system beam used to form the "skeleton" of the robot |
| idler gear | A gear in the gear train that is neither the driven nor the driving gear, and does not share an axle with another gear in the train. |
| KEPS Nut | A standard nut that includes a toothed "crown" designed to bite into a mounting surface and prevent the nut from slipping. |
| plate structure | A flat structural part used to provide a mounting surface for other robot parts. |
| structure parts | used to construct the chassis, levers, and sub systems. |
| standoff | A threaded piece that has threading on it or in it, which allows a screw to be fastened into it. |
Created by:
neumannr